Your cart is empty.
Your cart is empty.This metric drill bit set includes the following drill bits: 1.0 mm,1.1 mm, 1.2 mm, 1.3 mm, 1.4 mm, 1.5 mm,1.6 mm, 1.7 mm, 1.8 mm, 1.9 mm, 2.0 mm, 2.1 mm, 2.2 mm, 2.3 mm, 2.4 mm, 2.5 mm, 2.6 mm, 2.7 mm, 2.8 mm, 2.9 mm, 3.0 mm, 3.1 mm, 3.2 mm, 3.3 mm, 3.4 mm, 3.5 mm, 3.6 mm, 3.7 mm, 3.8 mm, 3.9 mm, 4.0 mm, 4.1 mm, 4.2 mm, 4.3 mm, 4.4 mm, 4.5 mm, 4.6 mm, 4.7 mm, 4.8 mm, 4.9 mm, 5.0 mm, 5.1 mm, 5.2 mm, 5.3 mm, 5.4 mm, 5.5 mm, 5.6 mm, 5.7 mm, 5.8 mm, 5.9 mm, 6.0 mm
nancy plummer
Reviewed in the United States on December 21, 2024
All undersized between .05-.1mm. Will work good enough for what I'm using it for but way overpriced for what you get
C.Burris
Reviewed in the United States on October 18, 2023
This is a great set of Metric bits!
nosoup4u
Reviewed in the United States on January 14, 2023
The metal case is solid with no opening or closing problems. Bits can be a bit rough to get out as they are packed in there pretty close. Bits came coated in light oil. The bits are sharp. This is a short term review so cannot verify how long they will stay sharp.Here are my measurements using Mitutoyo Absolute Scale Digital Caliper. Bit shanks cleaned before testing. Caliper jaws wiped down before each bit was tested.All in metric-1st row stated size, 2nd row actual size.m1.0-.991.1-1.081.2-1.2 *1.3-1.281.4-1.391.5-1.491.6-1.591.7-1.691.8-1.781.9-1.9 *2.0-1.982.1-2.052.2-2.182.3-2.282.4-2.352.5-2.492.6-2.562.7-2.692.8-2.762.9-2.953.0-2.983.1-3.073.2-3.173.3-3.273.4-3.353.5-3.463.6-3.553.7-3.673.8-3.763.9-3.874.0-3.964.1-4.064.2-4.164.3-4.264.4-4.364.5-4.454.6-4.584.7-4.674.8-4.754.9-4.855.0-4.955.1-5.075.2-5.165.3-5.265.4-5.355.5-5.445.6-5.575.7-5.645.8-5.775.9-5.856.0-5.93ymmvM0.05=0.0019685"You decide if there accurate enough for you. If your a clockmaker, well, erm, probably not a good fit.Hope this helps, more of a time sink testing these than planned..
Paulo Coelho
Reviewed in the United States on April 28, 2023
Everything about this kit is smack dead average. The box is a little rattily, awkward to open and the way the bits are placed is not bad but hard to see the numbers. The bits themselves are not the correct size. As others pointed out, if you're looking for precision this is not the right place. For example, my 4.0mm is actually 3.941mm (measured with a certified Mitutoyo 293-185-30 Quantumike Micrometer). Also, two of the bits I got already came with chipped tips. I'm giving this 3 stars instead of 1 since they're actually super cheap (
Bourlet François-Xavier
Reviewed in the United States on September 17, 2022
Most bits are 0.03mm under size which is good enough for me. Few bits are 0.05mm under sized.Because of the invisible embargo on metrics in the US (last country on earth with Canada not metric in every day life), I am already happy that I could purchase metric drill bits.I got a second 3.4 instead of the 3.3. The seller is sending me a 3.3 bit right away.
CanonFan
Reviewed in the United States on March 27, 2022
I’ll admit that I wasn’t expecting too much in the way of quality with these drill bits; the price was very low for a full set like this. But my expectations were proved wrong. These are excellent drill bits and extremely precise. I use them mainly for musical instrument making on wooden instruments, but they seem to work just fine will aluminum and steel. Highly recommended!
Rob
Reviewed in the United States on April 20, 2022
Fairly sharp points and cut well with the right feed, speed and lube. I’m not sure how long these will last drilling a bunch of hard steel. They will probably last a long time drinking softer materials like aluminum, plastic, wood, etc.
Brice k
Reviewed in the United States on August 13, 2021
Good quality and sharp.
Recommended Products
