Your cart is empty.
Your cart is empty.Product Description
1.9" Alloy Beadlock Wheel Rims for 1/10 RC-4WD D90 SCX10 90034 SCX10 III AXI03007 Rock Crawler
Alloy construction made it more durable
The heat dissipation ability is strong
Fine workmanship and perfect style
Shock-proof and high crush-resistant
Lightweight upgrade instantly enhances overall performance in handling and durability.
Thickness: 27mm;Hexagon totation:12mm
Zack
Reviewed in the United States on March 25, 2025
The rims look really good, but every bolt or screw included will rust and snap on you. I don’t ever take this in salt water either. I’ve had them a couple months and had about 7 sessions with them, 90% of the runs were dry.
Dmmt Dave
Reviewed in the United States on September 28, 2024
These wheels were great for 40 bucks. All of the tiny screws on the outer edge of the wheels are cosmetic, and are a little soft so use your loctite and don't go too tight. Snug only or they'll break (I only broke 1!). They hold my mud slingers on just fine, haven't had any issues with them at all. Loctite! Use it!
Fordguyconnor
Reviewed in the United States on September 29, 2023
Very impressed by quality and yes the tiny screws are fragile if over torqued bit other wise percent for my trx4 79 bronco
Michael
Reviewed in the United States on September 21, 2023
These wheels certainly look fantastic, and they go together pretty well. The outer ring of decorative screws takes a while to install- I'd recommend a tiny amount of blue loctite on each screw, and tighten it until it's just snug. If you wrench down on it, you'll either strip the threads out or snap the tiny bolt head. They're decorative, so they don't need to be that tight.These come with 3 different bolt sizes. The smallest bolts are the decorative ones, the middle size is for the wheel hub cover, and the largest size is for the beadlock ring in the rear. You get one extra bolt of each size with each wheel, so four spares of each size in total.As far as aluminum wheels go, these have a good amount of weight to them. There's a good chance your set may arrive with a handful of scratches and little scuffs. This may bother some people, but the way I drive my RC, I'm bound to add more damage so it doesn't bother me. The wheels come with 5-bolt center caps that cover the axle nut, and every single one has a faux locking hub machined into the top. I took a paint marker and painted the front "lockers" red, which really set off the look.Overall, decent value for the money (especially considering the wheels that these are cloning cost over $100 for a set of four). I can't wait to see how they do on the trail!
Jeremie Gene
Reviewed in the United States on March 26, 2023
I put these on a trx4 79 bronco. They are similar to the stock wheels so they are a great match. Very nicely machined. Some reviews mention the small screws breaking but that's most likely due to over torque on these tiny screws so what else can you expect. There are 20 decorative screws on each wheel. Very nice and would recommend
Todd England
Reviewed in the United States on April 23, 2023
These wheels are stunning and an absolute bargain. I liked them so much I just bought a second set! I did not have any issues with the decorative screws. The holes were all fully tapped and the screws went in all the way and were snugged down fully by hand. Due to the very fine thread pitch I did not use loctite, its just not needed. The stock VXT tires that came with my VS4-10 Pro beaded up perfect with these rims. The second set is going to be used on a set of Pitbull Rock Beast XLs. These are great looking wheels…just use some care when installing the decorative screws (ie. do not use a drill, don't torque em down like your life depends on it) and I think you'll be happy with them.
Bayani del Rosario
Reviewed in Canada on September 24, 2021
CSA
Reviewed in the United States on May 28, 2021
These wheels have the same offset as the stock SCX10 III plastic rimes. The quality is amazing. It almost doesn't seem possible for the money. Without the branding we all pay a lot less. The Micky Thompson's I bought last year were $120.00 and they are almost the same. The MT's are a little heavier. These are way easier to get your tires onto. I like that this set includes the center caps.
Konstantinos V Porichis
Reviewed in Canada on December 27, 2021
No complaints so far. Just use loctite and don’t try to overnight the small screws because they strip easy. Very happy so far. Love how my 1/6 scale Willys Jeep looks!!!!
A
Reviewed in Canada on September 21, 2020
These are amazing! I Read that some guys are complaining about the little bolts. Don’t listen. You just need patience and the right Allen key, and they go in nicely. Honestly these are easy to bolt on and the quality it’s great. I’m getting more!!!!!
Joshua
Reviewed in Canada on December 25, 2020
I don't know if the other reviewers received a bad batch, but my little outer ring screws were just fine. A LOT to lock tight and put in though.I have large brass portal weights in the front of my Trx4, and had to take a Dremel to the outer edge of the portal weights to clear the inner hardware of these beadlocks.I'm impressed by these wheels! Excellent quality and they include a few extra screws just in case.
RYANsTOYS
Reviewed in Canada on December 24, 2019
TBH was worried about holes not being tapped and soft screws. Not the case here. Every hole was tapped. The screws tiny screws being soft is not an issue as they are decorative, not functional. I recommend using a bit of loctite on the tiny perimeter screws. Loctite isn’t needed on the beadlock ring. And it’s your choice on the center cap. These are an excellent option flex for the TRX-4 Bronco as these wheels maintain the stock look, however you may want to buy option TRX-4 hex adapters that are a bit wider than stock.
Oldguy67
Reviewed in the United States on October 7, 2019
Love these wheels so far. Assembly was easy. Use loctite everywhere. Only 5 2.5 mm hex screws hold the three pieces together very nice should be quick tire changes in the future. The real time-consuming was the 20 small bolts ringing the front of the rim their aesthetic only you could leave them out but they look nice. There are also five screws that hold the center cap on which you could also leave those off if you don't want the centers on but again they look sharp. Have not run them yet so don't know if the beads will pull out but they seem quite secure if they hold up I will buy more of these. I'm sure they would look very nice with some scale tires, the tires in the picture are Duratrax Showdown which I'd love for running in the snow and mud we'll see how they hold up this winter.
Recommended Products
$28.99
$ 14 .99 $14.99