Your cart is empty.
Your cart is empty.Product Description
Wide range of use:
- mainly suitable for cutting and hollowing solid wood,MDF and other wood materials.
- It also good for grooving,dado cuts,slotting.
- use on table-mount,CNC routers,hand-held routers etc.
1/4-Inch 2 Flute Down Cut End Mill
Product Specification:
Style: Plunge Cut
Shank Diameter: 1/4inch
Cut Length: 1inch
Overall Length: 2-1/2inch
Material: Solid Carbide
Diane
Reviewed in Canada on March 12, 2025
I last ordered these 2 Pack bits on Sept 19 2024 and today is March 12 2025 I have finally wore 1 out using this bit about 2-3 hours a day. I like to have a backup so I am ordering these bits again. I have used the big names like Amana Whiteside IDC and more. These bits are equal quality at half the price.
Marc
Reviewed in Canada on September 14, 2024
this bit is very well balanced (no vibration with no load at 10000rpm)..the cut is truly smooth and work super well on soft wood..the Shanks and the Head look to be a true Carbide Steel..i'm super happy of this purchase after days of use..nothing bad about it until now..note about "Carbide":"Carbide" Bits (as any tools) are harder than "High Speed Steel" (HSS) and have a true better lifetime but may broke if you work with a "Chip Load" too high ("Chip Load" is the speed/quantity of material removed on your path by time).. "Carbide Steel" is hard/fragile like "ceramic" and you will appreciate it with time if you never have used it.. take care of your Tools/Bits as any of your favourites cutters and that will give you happy use..note 2:cheap "Carbide Bits" have the Head in Carbide Steel soldered/mounted on a HSS (high speed steel) Shank, and because HSS material (cheaper) is used, those type of mixed material Bits don't have a great "Chip Load" (because the fragile part here is the shank) and because HSS is used, they are more heat sensitive with less hardness/rigidity..
Customer
Reviewed in Canada on September 12, 2024
Does the job
Andi
Reviewed in Canada on August 30, 2024
Shallow passes on Baltic birch plywood.. should be easy work for any Endmill.. both broke within 5 mins of the carve.. save yourself the hassle and order elsewhere.
Woodworx
Reviewed in the United States on June 26, 2024
This bit has held its sharp edge after many hours of use. It gives a clean edge that looks great finish.
Joshua B.
Reviewed in the United States on July 27, 2023
Really nice cutter. It's very sharp and leaves a great edge.
Customer
Reviewed in Canada on July 12, 2021
I cut out on a cnc letters and it did a good job of it. No tear out.
Recommended Products