Your cart is empty.
Your cart is empty. This AA5052 Aluminum Radiator is designed to provide maximum cooling efficiency to prevent premature engine failure. Its light-weight, and high-heat transferring aluminum features a tube and fin design that, dramatically increases surface area that enables the heat to dissipate more efficiently. This AA5052 Aluminum Radiator is at least 30%-45% more efficient than stock ones. Most importantly, it has a much higher capacity for coolant than stock ones, which means that your cooling system will be more efficient and will be more resistant to temperature surges in racing applications.
Radiator:
Core Material: All Aluminum
Surface Finish: Raw Aluminum Unpainted
Includes CNC machined filler neck and cap
Including OEM Style Brass Petcock Drain.
High Performance Racing Spec.
3-Row of tubes Core Racing Design
Down Flow Or Cross Flow Type: Down Flow
Mounting Type: Bracket
Overall Size: Height: 23 1/2 X Width: 25 1/2
Core Height: 18 1/2 X Width: 20
Inlet Diameter: 1 1/4in Passenger Side
Outlet Diameter: 1 1/2in Driver Side
Transmission Oil Cooler Fitting Type: 1/2-20 Straight Thread, Inverted Flare
Internal Transmission Oil Cooler: Yes
Filler Neck Attached: Yes
Vehicle Fitment:
For Jeep Wrangler YJ TJ 2.4L 2.5L L4 1987-2006
For Jeep Wrangler YJ TJ 4.0L 4.2L L6 1987-2006
Description:
The core of the radiator is welded in vacuum brazing furnace, no epoxy.The Radiator are 100% welded by TIG
Stronger & Higher Capacity for Coolant than OEM units
Made of High Quality Aircraft Grade Raw Aluminum Construction
Full Raw Aluminum radiator is designed to provide maximum cooling efficiency to prevent premature engine failure
Its light-weight, and high-heat transferring aluminum features a tube and fin design that,
dramatically increases surface area that enables the heat to dissipate more efficiently
Michael Losurdo
Reviewed in the United States on April 13, 2025
2003 jeep wrangler sport product was used on. Perfect fit..
David S
Reviewed in the United States on September 14, 2024
I was tired of replacing the plastic tank radiators every few years on my 2000 TJ 4.0. This is a good upgrade for the price concerned buyer.
Whippoorwill Farms
Reviewed in the United States on August 28, 2024
Purchased for a 95 jeep yj 4 cylinder. The fit was perfect and made for an easy install. Have not had any issues with it and does it's job as intended. Would recommend.
john leonhardt
Reviewed in the United States on August 10, 2024
The radiator appears to be well made, fits in the support well. 2 problems: #1. The radiator shroud bolts to the radiator with 4 machine screws, this radiator has 6 fine threaded rivet nuts and no bolts were included.....#2. The rivet nuts do not align with the shroud bolt holes, they are off on at least 1 hole by 5/16",,,,, I am not going to modify the radiator or the shroud for fitment....so my vehicle is down until I get the correct fitment radiator....I can put the old radiator back in, but what a PIA......not happy!
Gabriel Graber
Reviewed in the United States on February 11, 2024
The only issue which was minor and common for aftermarket radiators is the fan shroud has one hole that doesn't quite match up. Otherwise fit and finish is really nice. I wasn't a fan of the included cap. Steam was coming from around mine so I just put my old one on instead and that fixed the issue. Overall I am very happy with the radiator.
Jared
Reviewed in the United States on December 15, 2024
Bought for my yj with a 4.2 liter. Took out of box and measured fit but have yet to install. Looks well build and welds look good. Will update when installed.
Don Voss
Reviewed in the United States on October 31, 2024
The radiator was packaged nicely and appeared to be of good quality. The big problem for me was the radiator had two different sized fittings for the transmission cooler lines. One fitting was 3/8 and the other 5/16? The fittings off the old radiator would not fit the new one. Both my cooler lines were 3/8 so the 5/16 fitting would not work for me. The new radiator takes an old ball inverted flare fitting with an integrated barb fitting. I didn’t think any parts store around would have anything like that but to my big surprise I had one in my junk bin. I was lucky but if you don’t have a junk bin full of old fittings I don’t know what you would do. As other said the shroud needed to be modified slightly to fit the new radiator and you’ll need 4 metric size #6 bolts.
Kindle Customer
Reviewed in the United States on January 11, 2024
Fit perfect. Good welds . So far so good . Even came with a radiator cap . Standard cap also fits . overall a good radiator at a much cheaper price . Everything bolted up just like factory.
Recommended Products
$68.80
$ 29 .99 $29.99
$28.79
$ 13 .99 $13.99