Your cart is empty.
Your cart is empty.Product Description
5 Ton Hydraulic Heat Press Machine with 3x5 inch Heated Plates
Specifications:
Voltage: 110v
Power: 400w
Temperature setting range: 0-250 ℃/0 ℉ - 482 ℉
Jack tonnage: 10Klb/5T
Jack height: 178mm/7inch
Heating plate size: 3"x5" (76x125mm)
Maximum clearance between upper plate and lower plate of heating plate: 35mm/1.37inch
How to Use
Connecting the power cable
The accessories of the 5T heat press have been assembled before packing; All you need to do is connect the power cable according to the standard and press the switch button.
Temperature Set
Based on our experience, we recommend that your setting temperature start at 180 ℉; Then wait for the temperature to rise. You do not need to set the time.
Adjusting the height of the Heated Plate
The convenient adjustment knob can quickly maximize the separation distance of the heated plate; After reaching the set temperature, use the pump handle to compact the content you need to make.
Process Upgrade
Reinforced Base
Two steel bearings are added at the bottom ,allow the machine to withstand greater pressure.
Convenient Knob
You can easily rotate the knob by hand to release the pressure without using other tools.After the heat press is completed, the heating plate can be separated by rotating the release knob for one cycle at most.
Border Bracket
The frame brackets on both sides of the machine,allow for more uniform and stable machine forces during the manufacturing process.
DIY YOUR LIFE
opticreyzor
Reviewed in the United States on January 29, 2025
Kick ass product
Cris
Reviewed in the United States on November 9, 2024
This product is not bad for the price it will definitely work don’t apply to much pressure it looks like it’s gonna break when you first open it and the face plate is very cheaply made and when you apply pressure the machine starts to crack although I do believe it was just the paint I do hope the manufacturer continues to work on the design maybe reinforce the bottom part that the jack pushes on I returned the one I got I just felt it was a bit unsafe looking and will invest in a better machine in the future
Brian Mitchell
Reviewed in the United States on November 4, 2024
I can not believe they are selling something this dangerous. I burned my hand twice just holding the handle. its so narrow that the heating elements are so close that the handle gets hot also.no balance at all. after I installed the feet it still tipped over.A cheap piece of crap!
Dobey
Reviewed in the United States on November 4, 2024
this thing isn’t worth the cardboard it’s shipped in. bottle jack doesn’t press level out of the box and it stopped heating the plates the third time I turned it on. you get what you pay for with these
Michael S.
Reviewed in the United States on November 27, 2024
Presses buds to THC-A
Mary Ann S.
Reviewed in the United States on November 18, 2024
I was ready to send it back because I didn’t understand how to set temp. It’s tricky.I didn’t put the feet on, really no need to. It squeezes down so effortlessly being five ton. Temp is close enough, sometimes within 1 or 2 degrees. I love the design. I love the fact that the lover attaches to the unit.
fred adams
Reviewed in the United States on April 7, 2024
this piece is perfect. I turned all of my big jars into little bitty jars and I love the product I get. it does tend to run a few degrees warmer than what I set it to, but that is easy to compensate for. I can press 7 g at a time no problem. I’m extremely happy with the price, and functionality.
Brian H.
Reviewed in the United States on July 6, 2023
I was having some issues with getting a good press with this machine. After I few tries I grabbed my infrared temp gun to check the plate temps. I have it set at 190° and the top temp was about 191-215°. When I checked the plates they were closer to 230° and I was forced to turn the temp down to 165° to get into the mid to upper 170s. This is not good for those who don't have a means to measure their heat a lot closer. The most crucial part of this machine is inaccurate.There was some damage to the footings on the machine when I got it, but did not affect the stability of the machine when pressing. The base can stand to be a bit wider so when you get to the last handle pull it won't flip over.
Recommended Products