Your cart is empty.
Your cart is empty. Specification: Material: Metal Plated Nickel
Pin Diameter: 5mm/0.197” Pin Depth: 9mm/0.354" Shelf rest length: 19mm/0.784" Width: 13mm/0.512" Hole diameter : 4mm /0.16" Total length: 29mm x 13mm x 19mm / 1.14in x 0.51in x 0.784in (L x W x H) Packing: 6mm x 40 pieces Please measure the size you need before buying Tips: 1. For better results, the diameter of the hole is less than or equal to 5mm. 2.Made of Nickel which is sturdy, not easy to wear and tear, so it has a long lifespan 3. Suitable for shelves in kitchen cabinets, study rooms, shoe cabinets, bookcases and snack cabinets to meet daily needs.
_texas gal
Reviewed in Canada on March 29, 2025
These are nice, heavy duty!!
Luc Cantin
Reviewed in Canada on March 17, 2025
Great quality
juice
Reviewed in the United States on February 23, 2025
This is a lifelong replacement for plastic shelf holders
Dono
Reviewed in Canada on January 5, 2025
Replaced the plastic supports that came with a cheaper shelving unit and found these metal ones extended twice as long providing the support needed to keep shelf from falling when the center partition of the shelving unit does not stay perfectly straight which occurs frequently in the cheaper cabinets. These metal supports extend out 11/16 " (almost 3/4 inches) each side, and double the support area of the cheap small plastic supports that came with the cupboards. The 5mm peg fit nice and snug in the cabinet holes without any adapting required.......... A good purchase.
Char
Reviewed in the United States on May 5, 2024
Like being able to change the height of my shelf up or down half an inch.
steve kangas
Reviewed in the United States on May 31, 2024
Well made. Used for another take.
Meaghan
Reviewed in Canada on November 7, 2024
This is vaguely spoon shaped. I would be hard pressed to eat soup with something shaped like this. Perhaps “oar shaped” would be a more appropriate name.
Customer
Reviewed in the United States on January 6, 2024
I bought these to replace old plastic ones we had in our cabinets. These clips completely bent under barely any weight, and everything from 2 shelves came crashing down. In the picture, you can see the bent one on top. I’ll spare you pictures of my feet that were destroyed by this incident. Horrible product.
One Path
Reviewed in the United States on June 21, 2023
Not true to size as advertized! Highly disappointed! Its closer to 6mm, not 7mm.
Jay
Reviewed in the United States on November 2, 2023
If you are like me and have those cabinets where they have plastic little shelf holders, Buy These Now! Especially, if like mine, the shelf Always falls down like every month. I was so annoyed and have dealt with this for several years. Then, one day, after the stupid shelf fell again, I did a search and these popped up. I figured I was throwing money out and it would work. But boy was I wrong. They did, however, drop the shelf down by about a quarter of an inch. Didn't bother me a bit! I even thought about using the hole to place a screw to the shelf. But instead used a tiny dab of hard as nails. That shelf doesn't move anymore! The shelf cannot fall anymore. And I am thrilled! I'd buy these and do it all again in a heart beat! I bought a big enough bag I did the entire pantry shelves and am so happy. I even did a tv stand! LOVE IT!
Jon in MI
Reviewed in the United States on April 19, 2023
I used these to add an extra shelf to a kitchen cupboard. The pins on all the support pegs available locally were too long
John Ontario
Reviewed in Canada on September 24, 2022
They work ok but L shaped are better.
Inspector Gadget
Reviewed in the United States on October 20, 2022
Used in a movable shelf install. This was pre-fab units from Menards, their Dakota brand. Perfect fit.
Recommended Products
