Your cart is empty.
Your cart is empty.Product Description
Safety Attentions
1.Get the tools and cables ready. Select the appropriate cable to ensure that the current density is less than <6A/ mm2, which is conductive to reduce the cable voltage damage 2.This controller will be heat when working. Please install the controller on the flat,well ventilated environment. 3.In the process of connecting wires, please connect the battery first (in order to ensure the correct indentification of the battery voltage level) ,then connect the solar panel. After the controller completes the battery voltage lever indentification, manually close the load output of the controller and connect the controller finally. 4.In order to use security, please do not use solar panels that exceed the rated current of the solar controller; please do not connect the load over rated current; please do not use AC/DC switching power supply instead of solar panel to cornet the controller.
Feature:
- Intelligent 3-tage PWM charging mode
- Input voltage: ≤100V (12V/24/36/48V Auto)
- 12V/24/36/48V full automatic identification
- LCD display screen with backlight function
- Adjustable charging and discharging control parameters
- Battery over discharge/overvoltage/low voltage protection
- Battery reverse discharge protection
- Various load mode
- Voltage temperature compensation
Good Heat dissipation
Made in aluminum alloy material, have good heat dissipation
Large LCD Diaplay and Button Degin
Big LCD display screen with backlight function, and button degin, easy to operate
PWM Solar Charge Controller
Rated voltage: 12V/24V/36V/48V DC Auto
Input voltage: ≤100V (12V/24V/36V/48V Auto)
Temperature compensation: -4mV / Cell / ℃
- First, according to the diagram, connect the positive and negative electrodes of the battery to the controller, it will auto-indentify the battery voltage.
- Then, connect the solar panles to the controller.
- Finally, connect the positive and negative electrodes of the load to the controller, prevent reverse.
- When using lithium battery with protective panel, set the voltage level to be a fixed value. Do not set the battery to be automatic indentification. In order to prevent the protection of the lithium battery board from the solar input after starting the controller to indentify the error voltage.
- The open-circuit voltage of the solar panels must be smaller than the maxium allowable voltage required by the lithium battery to prevent battery damage from excessive voltage.
- When using the lithium battery, the short-circuit current of solar panel should be less than 0.3C (Lithium battery capacity).
Lou
Reviewed in Canada on July 13, 2023
Pas encore utilisé pour le solaire
sammy
Reviewed in the United States on September 28, 2022
Solar
pam
Reviewed in the United States on September 1, 2022
Charger over charged batts. Advertised as 14.6v actually is 15.5 before it goes into float mode.( not adjustable) my inverter has a high input voltage shut down at 15.5 . does not work with my system. Returned the unit
Gersum Quiamco
Reviewed in the United States on May 25, 2022
Like the product, works very good
René Villeneuve
Reviewed in Canada on July 30, 2021
J’avais un problème de faible rendement avec mon système. J’ai pensé que le problème provenait de mon régulateur mais j’ai obtenu le même résultat. Donc, ça venait d’ailleurs.Maintenant j’ai de la difficulté pour retourner l’appareil et me faire rembourser par iSunergy.
Renald Morin
Reviewed in Canada on October 31, 2021
La traduction de l’anglais laisse à désirer. Il n’y a pas de fiche pour IPOD sur le 50amps ce qui est dommage.
Robert Weaver
Reviewed in Canada on May 11, 2020
As far as I can tell, all this charger does, is apply to the battery exactly what the panels are giving it.. Solar chargers are supposed to be able to take what power is given to them, and output the correct voltage at the fastest rate it can do it(Usually in pulses). I had measured 500w of output from my panels, but this thing was only charging at a rate of 60w because my panels were around the same voltage as the batteries.
Recommended Products