Shopping Cart

Your cart is empty.

Your cart is empty.

ALLOYWORKS Performance Full Aluminum Radiator+Shroud Fans+Relay For 1991-2001 Jeep Cherokee XJ 4.0L Comanche L4 L6 Off Road

Free shipping on orders over $29.99

$229.00

$ 99 .00 $99.00

In Stock
  • ◆ Radiator Replacement For 1991-2001 Jeep Cherokee XJ 4.0L Comanche L4 L6 Off Road
  • ◆ Improves cooling by 35% to 45% temperature
  • ◆ Made of high quality full T-6061 aluminum construction
  • ◆ Stronger and higher capacity for coolant than stock units
  • ◆ Only the highest grades of materials are used for ALLOYWORKS to ensure our product longevity!


THIS LISTING INCLUDING ONE RADIATOR AND ONE SHROUD AND 3 X 9" FANS+ THERMOSTAT KITS!
Radiator Size:
Material: Full Aluminium
Radiator Cap: included
Core and Tank: All Aluminum
Core Height: 11.125
Core Width: 31
Overall Height: 13.5
Overall Width: 36
Inlet Diameter: 1.25
Outlet Diameter: 1.5
Upper Hose Fitting: PASSENGER
Lower Hose Fitting: DRIVER
Trans Cooler Details: 5/8-18 Straight Thread
Mounting Type: PIN MOUNT
Vehicle Fitment:
1991-2001 Jeep Cherokee l6
1995-2000 Jeep Cherokee SE Sport l4
1991-1992 Jeep Comanche 4.0L l6
For Jeep 91-01 Cherokee 2.5L 4.0L 91-92 Comanche 4.0L
For Jeep Cherokee XJ 6 Cylinder 1991-96 97-2001
For Jeep Cherokee Comanche l4 l6 2.5 4.0 6 Cylinder 1991-2001
(Fits Automatic and Manual Transmission Models with 2.5L 150Cu In. l4 or 4.0L 242Cu In. l6 OHV Engines ONLY)Please be Sure to Check Compatibility Chart
FANS SIZE:
Maximum Fan CFM: 1730 cfm
Fan Diameter (in): 9.050”
Thickness (in): 2.500”
Number of Blades: 10 blades
Maximum Fan RPM: 2,250 rpm
Blade Material: Plastic
Amp Draw: 12.70 amps
Includes the Mounting Tabs for an Easy Zip Tie Installation
Thermostat Kit:
Universal fit for any automotive vehicle and electric fan.
Activates by grounding electric fans at preset temperature.
180'F turn-on temperature, 165'F turn-off temperature.
3/8" NPT thread-in brass probe w/ 1/2" NPT adapter included.
Probe typically threads into radiator, water outlet or manifold.
Please Notice:
To confirm that this part fits your vehicle, enter your vehicle's Year, Make, Model, Trim and Engine in the Compatibility Table.


Marcus Hoffman
Reviewed in the United States on February 14, 2025
Bought for a ‘89 Cherokee build. Fans are fantastic and function as needed. If you’re outside the year window like myself, you will have to cut some needed space for the filler next and cap to clear. If you can replace a radiator, you can handle it.. 10/10 for my LS swap project
Zachary Cain
Reviewed in the United States on July 27, 2024
Got product, oil line doesn’t fit, wrong size push lock connection. Need 3/8 barb not the 1/2 inch it came with
Rig
Reviewed in the United States on March 4, 2024
89 jeep cherokee aluminum radiator fans and shroud. Plus cap and wiring harness all working fine. Recommend it for your XJ.
Mario
Reviewed in Mexico on March 24, 2024
Muy bueno, los ventiladores muy potentes y hacen mucho ruido...., lo demás es excelente producto
Nicholas lemaster
Reviewed in the United States on March 17, 2024
Took more drilling and had to remove my stock ac out to make it fit. So far seems fairly solid the little wires you get are junk I just ran mine with 10gage to a switch in the dash.
Quinten brubaker
Reviewed in the United States on February 2, 2024
Box is in good condition not like it was dropped, kicked or anything like that but found a small hairline crack and the 3rd fan is broken
Manuel C.
Reviewed in Mexico on December 8, 2024
Muy buena compra, 3 abanicos de buena calidad le ayuda mucho aque baje demaciado la temperatura de la Cherokee ya que es un motor muy caliente , excelente compra
Jeffrey Brian Edwards
Reviewed in the United States on November 8, 2024
Pulled the old one out and put this one in and it fit perfectly! Only took me an hour and I was ready to roll!
Customer
Reviewed in the United States on November 10, 2024
Rad works great and as ordered. Came in undamaged and all the fittings and hose sizes were direct replacements from original only thing for anyone not experienced ordering this kit beware you will need to make connectors or splice into the fans in order to wire them to a switch or the original harness. Overall very happy with my purchase.
Odd Rod
Reviewed in the United States on January 14, 2024
Nothing is correct. Upper is 1.25" not 1.5". Lower is 1.5" not 1.75". Mounting points are nowhere near right. Will be returning soon and looking for something elsewhere. Sometimes you get what you pay for. Took a chance and lost.
Trenton Pregizer
Reviewed in Canada on July 17, 2023
Put this into my sons 91 Cherokee mud bogger to replace the factory one that was leaking. The fans move way more aur than the two factory fans we had in it. A couple downfalls are the top mounting brackets line up with nothing. So we put a couple 1/4 inch bolts as pins in the top support to line up with the two tabs . Easy and worked really well. Other problem was the return line fitting for the trans cooler was bigger than our jeep. My remedy was cut fitting end off and hise clamp it on past the lock ring. And the wiring harness leaves alot to be desired... mainly no plugs that go to the harness to each of the 3 fans.
Craig
Reviewed in Canada on June 13, 2023
opened box to install and found that's its all bent and twisted