Your cart is empty.
Your cart is empty.The Alphacool Eiszapfen temperature sensor flat G1/4" is a simple water temperature sensor that can be easily integrated into any water loop. Integration made easy The temperature sensor is very compact and can be integrated into any water circuit due to its G1/4" external thread. It is simply screwed into the corresponding G1/4" connection at any position in the water loop. Due to the small screw-in depth, it is compatible with all Alphacool products with a free G1/4" connection. Sensor A classic NTC 10 kOhm thermistor is used as sensor. The readable temperature range is between -40 and 125 degree C. The cable is 40 cm long and leads into a typical 2-pin connector. Many mainboards now offer direct connection options for such sensors. Please check the manual of your mainboard. Of course there are also several external controllers that offer a connector for the sensor. Design The design is very simple so that the temperature sensor can be installed almost invisible in the system. Compatibility: G1/4" female connectors Technical data: H x D: 17mm x 18mm Material: brass Color: black Cable length: 40cm Connection: 2-Pin Thermistor: NTC 10 kOhm Thread: G1/4" IT Thread length: 5mm Total screw-in depth: 13mm Model: 17596
Mickaël
Reviewed in France on September 15, 2024
Le câble en sortie de sonde est un peu trop rigide, de ce fait il est difficilement camouflable. Il faut compter environ 1 cm de câble non pliable en sortie de la sonde.
wolfgang g.
Reviewed in Germany on August 31, 2024
Ich fühl immer noch nix...., naja typisch Mensch. LG
David Kühnert
Reviewed in Germany on May 14, 2024
Der Sensor lässt sich überall flexibel verbauen schade ist nur das man beim festziehen doch eine Zange oder Ähnliches braucht am besten ein Tuch verwenden um den Lack nicht zu beschädigen.
LJ Herselman
Reviewed in France on December 14, 2024
Positive - It works, connected to my ASUS X670E-ENegative - Quality control of my purchase is non existent.The glue is yellowish and non even.The cable coming out of the G1/4 connector has black paint on which is flaking off.The cable had also been glued in place at an angle and not straight out as one would expect.
Philipp
Reviewed in Germany on August 29, 2023
Ich habe den jetzt schon zweimal gekauft.Der erste hat ein paar Monate lang dicht gehalten und dann aufeinmal nicht mehr. Habe den dann vor Wut auseinander gerissen und in den Müll geschmissen.Ein Jahr später wollte ich dem Sensor noch eine Chance geben, heute angekommen, gleich eingebaut, leak test gemacht, undicht!Ich wusste gleich wo das Problem liegt, Sensor ausgebaut, leak Test gemacht, dicht!Bloß nicht kaufen, letzter Müll und unausgereift.Ich schätze mal das der O-Ring zu dünn ist und nicht richtig abdichtet.Geht aufjedenfall wieder zurück.
Recommended Products
$29.00
$ 14 .99 $14.99