Your cart is empty.
Your cart is empty.CNC Solid Carbide Spektra Extreme Tool Life Coated Bits are made by Amana Tool, the leading manufacturers of high-quality wood-cutting tools. Amana Tool 46350-K CNC SC Spektra Extreme Tool Life Coated Mortise Compression Spiral 1/4 D x 1 CH 1/4 SHK 2-1/2 Inch Long 2 Flute Router Bit features a nACo nanocomposite coating with an extreme nanohardness and heat resistance. With a brilliant, distinctively-tinted coloring, nACo provides additional improvements in four critical aspects of router tooling. Excellent for: MDF/HDF, Laminate, Laminated Plywood, Melamine, Particle Board, Softwood/Hardwood, Veneered Plywood. SPECIFICATIONS: (D) Diameter: 1/4; (B) Cutting Height: 1; (d) Shank: 1/4; Overall Length (L): 2-1/2; B1: 1/8; Flutes: 2.
Cabmaker
Reviewed in the United States on April 19, 2023
This cutter does a great job and stays sharp for a long time.
Steliyk
Reviewed in the United States on April 13, 2022
Didn't last 2 week even.
A. R. Brown
Reviewed in the United States on June 13, 2021
Never used a compression bit before so a learning curve. Cuts as advertised! No tear out, no splintering. You have to cut with one pass, so best for plywood. At 2000 rpm with one pass the router tries to jump - even when not climb cutting. So if you are using in a router vs a CNC hold it tight and go slow. It’s sharp and leaves No damage. Worth the price not to ruin the wood.
Richard P.
Reviewed in Canada on September 11, 2020
Good performance and endurance
GWM
Reviewed in the United States on January 10, 2020
Best mortise compression bit I have ever used. Really cuts nicely in different plywood grades including baltic birch at 15000 RPM and 400 IPM with great finish. I recently cut through 1.5" thick marine plywood with this bit running 15000 RPM, 400 IPM and .3" deep passes. Worked very nicely.
Steve S
Reviewed in the United States on March 21, 2019
The media could not be loaded.
robert damelio
Reviewed in the United States on April 21, 2019
Works as expected
Joseph Booth
Reviewed in the United States on October 24, 2018
Very sharp and last well
silvio
Reviewed in the United States on September 25, 2017
Cut great while it lasted, broke the bit in half cutting 11mm plywood at a reasonable feed rate on CNC router.
Recommended Products
