Your cart is empty.
Your cart is empty.Black Blue Shift Inspired Graphic kit that fits a 1987-2004 Yamaha Warrior 350 Printed with Top of the Line Roland Printer. High Quality Oracal Vinyl Then Laminated with High Quality Oracal laminate Our graphics are the same thickness as the OEM kits, 7mil material. They install super easy, lay flat and smooth and hold up great for years. MADE IN THE USA!!
Jared Stoltzfus
Reviewed in the United States on July 19, 2024
These graphics are top notch ! Very good quality. I read all the reviews before purchase. These are easy to put on, BUT. You definitely need to order a product called Sticker On, (sold on Amazon). You will struggle significantly without it. It comes in 2oz & 20oz. Get (2) 4oz bottles. You will also need a decent heat gun, (not a hair dryer). Wipe all the plastic down w/ Isopropyl Alcohol. Try to avoid any fans or open air, as this may blow fine particles on plastic that will get stuck under graphic. I didn't like the graffiti type "Warrior" logo, so I just cut out what I wanted for the back fenders. Use a good pair of scissors. I would say that I'm above average at applying these, just due to previously working with window tint. I wouldn't even attempt these with out the use of Sticker On. It's bu far the best $14 you can possibly spend. As for soap & water : I only purchased the 2oz bottle & ran out on the last back fender. I used Dawn & water & the results were significantly decreased. It took longer to set up, constantly moving & I have air bubbles under that section. My plastics were in good shape, they were just dull I'm areas. Now, it looks about as good as it will, for a 2003. I think it totally transforms the quad.
greg roberts
Reviewed in the United States on April 20, 2024
graphic are not meant to be put on with soap and water just clean with denatureized alchol very good and stick on nice and easy looks fantastic I cut a bunch off to make it match better came out great for the little bit of money it cost
wanda
Reviewed in the United States on November 19, 2023
Good quality
Jovanie Gutierrez
Reviewed in the United States on August 30, 2022
It was hard to put on you need yourself and another person. You must need a heat gun removed all the wrinkles and bubbles if you don’t have a heat gun just grab a sharp knife and pop a little hole on the bubble or wrinkle to remove it. I’ll put it how it was before and it did brought it to life and gave it more looks.
Charles Weaver
Reviewed in the United States on July 24, 2022
Great quality graphics kit for my 98 Yamaha Warrior. It took about 1+ hour to do myself.
Emma C
Reviewed in the United States on January 10, 2021
These sticker do not fit right on most of the plastic. You get a lot of wrinkles
Dj
Reviewed in the United States on April 25, 2021
If you have never done a decal kit do some research 1st. It definitely gave this old warrior life.
Recommended Products
$64.99
$ 26 .99 $26.99