Your cart is empty.
Your cart is empty. 1) Notice:Support PCI-E NVME M-key SSD extension only.Supports PCI-E 4.0 & NVME Data transfer rate up to 64Gbps; (Note: SSD are not included.)
2) Notice:Does not support SATA B+M-Key, M.2 PCIe AHCI SSDs, M.2 PCIe devices such as WiFi and capture cards, mSATA SSDs, and non-M.2 form factor SSDs.
3) Support for Windows 8/10/11.
4) Installation steps: Please see our installation diagram for installation steps.
5) The package includes a riser card, a bracket, a screwdriver and two screws.
Jerry
Reviewed in the United States on March 4, 2025
Worked great with no issues.
Hinnerk Kaufmann
Reviewed in Germany on April 15, 2025
Keine Funktion - in drei unterschiedlichen PCs getestet. Schade.
Vincent T.
Reviewed in Germany on April 10, 2025
funktioniert super, habe einen E-Key für WIFI zu nem B-Key für eine NVME gemacht. Klappt hervorragend!
aussiedeafman
Reviewed in Australia on July 31, 2024
Installed in an Asrock ITX motherboard to increase SATA ports from 4 to 6. Working well.
solemnwarning
Reviewed in the United Kingdom on July 21, 2024
Once booted into an OS, both attached drives are accessible, but neither can be used to actually boot the computer.There is an onboard BIOS option ROM, but it doesn't detect any drives, since the same controller chip is used on some motherboards, where it is bootable, I can only guess the configuration is (disappointingly) hard-coded to not initialise/detect the drives.Also both of the included SATA cables were garbage and introduced lots of CRC errors and link resets - straight into the bin.
Jordan Marinov
Reviewed in the United States on December 23, 2024
Worked great for adding 2 extra SATA3 ports on my home server mini-ITX board, running Ubuntu 24LTS Linux. Drives were recognized right away after booting, no special drivers or fussing required. Speeds are on part with the built-in SATA3 ports and now I can add some much needed storage expansion without upgrading the whole system.
Andrew Fox
Reviewed in Australia on July 25, 2023
Adding this adapter in place of the wifi card (you can use Ethernet or a PCIe Wifi Card) adds 2 extra SATA ports which allowed me to reconnect the slimline DVD drive to the system.I have an HP SFF desktop that can house a 2.5" drive & 2x 3.5" drives. I filled it with an SSD & 2 HDDs. Only problem is the motherboard has provision for 4 sata ports but HP cheaped out any only put 3 sata ports and left the 4th port as just traces on the board.
AJ
Reviewed in the United States on December 29, 2023
Using this with 2 Sata SSDs and passed this device through to a virtual machine for a RAID array as a system disk for the VM. Works flawlessly for my purposes. Nice little unit to have around to add a couple of sata ports
Recommended Products
