Your cart is empty.
Your cart is empty.This replacement windshield wiper linkage has been engineered to match the function and performance of the original linkage on select vehicle years, makes and models to restore wiper operation. This part is compatible with the following vehicles. Before purchasing, enter your vehicle trim in the garage tool to confirm fitment. [Dodge Ram 1500: 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001] - [Dodge Ram 2500: 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002] - [Dodge Ram 3500: 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002]
M L DM
Reviewed in the United States on April 21, 2024
Quality was excellent. It was the right model (Dodge) wrong year. Looking for “1995” Caravan.
Austin gomon
Reviewed in the United States on December 30, 2023
Had a 94 Dodge ram that needed a replacement, it bolts in just fine and is sturdy enough but the part that is not compatible is where the motor is bolted onto the arms to move the wiper. I wound up filing and even welding the circular hole into a horizontal slit so I could mount the electric motor properly. Is holding up so far, but required some doing. I will update if it brakes for any reason.
Consumer B
Reviewed in Canada on April 19, 2020
The knob that the wiper arm presses onto broke when I was pressing the driver side wiper arm onto it. The assembly fit like it was supposed to and worked when I turned the wipers on... too bad.
edsofish
Reviewed in the United States on March 3, 2019
Upon installation of this assembly one should note that the arm that connects to the motor is not splined as the motor is and the original transmission was. Further is that you need to bend the driver arm up to clear the bolt on the motor connection to facilitate smooth motion of the arm. It will hit the motor bolt if you don't. The real problem is that the heads of the wiper arm attachment are too big and the wiper arms will not mount on the heads. There is little you can do to remedy this since you are unable to sand or file the diameters on each piece because you will ruin the spline. The only solution I was able to do was to heat the wiper arm with my heat gun and tap the arm down on the transmission wiper arm head with a small hammer. This was done with caution and took time but eventually went down enough to enable the clip to engage. If the weather were not so rainy now I would have looked for another maker.
Customer
Reviewed in the United States on February 5, 2017
Does not fit a 94 dodge97 and up with a round hole not the rectangular one in earlier models.
Recommended Products