Your cart is empty.
Your cart is empty.When an exhaust manifold fastener breaks on certain Ford vehicles, repairing it conventionally usually requires significant labor, up to and including removing the cylinder head. This Dorman OE FIX repair clamp bypasses existing hardware, even if it's broken. Rather than cutting, heating, and extracting the compromised fastener, use this kit to save time and labor and provide just as secure a connection as factory equipment with common hand tools. This part is compatible with the following vehicles. Before purchasing, enter your vehicle trim in the garage tool to confirm fitment. [Ford E-150 Club Wagon: 2003, 2004, 2005] - [Ford E-150 Econoline Club Wagon: 1997, 1998, 1999, 2000, 2001, 2002] - [Ford E-150 Econoline: 1997, 1998, 2002] - [Ford E-150: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014] - [Ford E-250 Econoline: 1997, 1998, 1999, 2000, 2001, 2002] - [Ford E-350 Econoline Club Wagon: 1997, 1998, 1999, 2000, 2001, 2002] - [Ford E-350 Econoline: 1997, 1998, 1999, 2000, 2007, 2008] - [Ford E-350 Super Duty: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016] - [Ford E-450 Econoline Super Duty Stripped: 2000, 2001, 2002] - [Ford E-450 Econoline Super Duty: 2000, 2001, 2002] - [Ford Econoline Super Duty: 1997, 1998, 1999] - [Ford Excursion: 2000, 2001, 2002, 2003, 2004, 2005] - [Ford Expedition: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004] - [Ford F-150 Heritage: 2004] - [Ford F-150: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008] - [Ford F-250 Super Duty: 1999, 2000, 2001, 2002, 2003, 2004] - [Ford F-250: 1997, 1998, 1999] - [Ford F-350 Super Duty: 1999, 2000, 2001, 2002, 2003, 2004] - [Lincoln Navigator: 1998, 1999, 2000, 2001, 2002]
john w.
Reviewed in the United States on February 25, 2025
was missing the bolt on the rear exhaust manifold and the head was stripped. This worked perfectly.
Ethan
Reviewed in the United States on September 19, 2024
Worked like a charm. Saved me a ton of time and frustration. Bolted right up and holds a very tight seal.
david g
Reviewed in the United States on July 19, 2024
Fit perfection my 2001 v10 ford. No where in description or on Amazon's vehicle list did it say it would fit. But I Took my chance and I works....I thought it would. So dont think twice about it. Proof is in the pictures.
ben cummins
Reviewed in the United States on July 12, 2024
No more exhaust tick happy
Jim
Reviewed in the United States on May 5, 2024
Had a right side manifold leak on a F250. Two studs are broken off into the head. The part was able to put pressure on the end of exhaust manifold to stop the leak. Works great.
Sergey Shalygin
Reviewed in the United States on May 3, 2024
Iordan Ivanov
Reviewed in Canada on February 25, 2024
I was looking for a product like this for quite some time! It was exactly what I needed.Fits perfectly in my 2003 Ford E350 superduty truck with the 5.4L V8. It helped with the leaking exhaust manifold gasket.Highly recommend this product!
Michael
Reviewed in Canada on October 1, 2024
In theory this thing should work but it doesn't...for me anyway. They sent it with 2 standard bolts that are too big for the holes and 1 metric bolt that does fit but doesn't clamp anything because it's too short.
Wayne Sean Beaulieu
Reviewed in the United States on April 27, 2024
I have been struggling with this bolt for years. I’ve tried penitent lube, I’ve tried welding a nut to the stud, I’ve tried striking it. But the broken stud would not come out of the head and the exhaust kept leaking.This bracket did the trick and the exhaust leak is now gone. This is going to be a permanent answer and I will not remove it.My only issue is that the two large bolts that came in the kit, did not fit the head bosses. I had to go to the hardware store and get a smaller diameter. With that being said, I still would give this a five out of five, even with the wrong hardware. Great product.
Recommended Products
$185.00
$ 78 .99 $78.99
$140.95
$ 56 .99 $56.99