Your cart is empty.
Your cart is empty. Essential Accessories for Tesla Model 3 Owners
The outside mud, sand, leaves and other small items can enter the interior of the vehicle from the front air take port when driving. And it will block the air vent which causes battery performance degrades.
The Front Grille captures leaves and more small items and ensures your Model 3 will run at its top efficiency.
If you’ve been wanting to see improved air and better mileage, Our front Front Grille mesh should be your first stop.
Specifications:
Conditon:100% Brand New
Color: black
Material: premium ABS plastic with piano black surface
Package List: 1 x Front Grille
Fitments:
Compatible for 2017-2023 Tesla Model 3(Not for Model Y)
Installation method:
1. Find the location that matches your car.
2. Clean the surface to be bonded. Keep it dry and clean.
3. Tear off the adhesive protective paper on the back of the body and attach it(the double-sided adhesive tape can be slightly heated with a lighter).
4. After installation, press the edge firmly.
5. Do not move the item or wash your car within 48 hours after installation.
Marc
Reviewed in the United States on March 2, 2025
The screen looks great, the mesh looks like very good quality compared to others. I had purchased one before that was in two parts and had to glue together in the middle. This one lasted ok but the mesh was easily bent with small rocks. This one is much more sturdy and being a whole piece it feels more durable. Installation was a complete breeze. I actually followed another reviewer's recommendation of using Velcro adhesive strips and it works great. This way it can be easily removed to be cleaned and placed back on again. This one is definitely worth it.
Jake M
Reviewed in Canada on February 3, 2025
Genius. This part should be original on all Tesla's. This fits fine and I installed it months ago, have washed my car weekly in brush wash washes, and it's held up well. Installation took 5 minutes. Great product!
David D.
Reviewed in the United States on April 3, 2025
Installed this product on my 22 Model Y today and I must say it fits like a glove. I like the one piece sturdy approach of this particular one. I used velcro instead of the two sided tape for the install for easier take off should that be needed in the future. It snaps in so it ain't going anywhere. Very happy with this product. Highly recommend.
Ryanz9u0
Reviewed in Canada on July 17, 2024
Simple to install, fits perfectly, looks great in my opinion. It is possible to remove just the screen/mesh part, (I haven't tried to do it after installation yet, which is probably more difficult) I suppose to clean it, or in winter so it doesn't get clogged with snow and ice.
I.beaudoin
Reviewed in Canada on March 5, 2024
Facile d’installation, pour le moment tout me semble correct.La grille est solidement en place aucun bruit !Bravo.
Pinolero
Reviewed in the United States on March 21, 2024
This is an easy install that adds a good touch of color to stand out from other MYP. I haven't used it in the summer yet but have seen other reviews stating that it's a bug catcher. I regularly clean my vehicle so I'm not too worried about that.I would recommend this for an easy visual upgrade.
Santhosh
Reviewed in the United States on February 7, 2024
This snaps just like a claw. Easy install within few mins.Cons: the red is little on pink shade as you see in the pic. But worth for the price.
Derrick MacDougall
Reviewed in Canada on February 23, 2024
I picked this up after reading other Tesla owners complaining of debris accumulating on the radiator/coil for the heat pump. I wanted a single piece rather than the 2 piece kits that you need to snap together. This one is 1 single piece. It comes with double sided tape to hold it in place. I've had this for a while now and it's winter and this has held up fine through highway driving, snow storms, car washes. Great purchase!
Jason M.
Reviewed in the United States on December 10, 2024
After taking out my Frunk tub I gently hosed out years of leaf and gunk buildup on the radiator, I found this. Simple design will keep most of the junk from getting to the radiator. It takes 1 minute to install. Clean off the plastic where the sticky ends go on your car with rubbing alcohol then dry. Peel the tape off on both ends of this grill and stick it on over the existing grill. You will hear the clips clip in when you apply slight pressure to the area where the clips are. Massage the two taped ends for 30 seconds. Done! Will update if necessary.
Dennis Dulyea
Reviewed in the United States on November 2, 2024
It’s a perfect fit…looks great, too!
Claude Bénard
Reviewed in Canada on April 14, 2024
Très belle grille qui empêche les feuilles et les roches de se rendre au radiateur. Très facile à installer. Reçu en excellente condition et livraison rapide.
Nathaniel
Reviewed in the United States on March 3, 2023
I purchased this grille after having previously purchased an alternative (cheaper) model I found on Amazon that utilized a different design. That model was actually made up of two pieces that joined in the middle and used adhesive pads to hold them together. Like this model, it also utilized several tabular clips and additional adhesive pads on the two ends to hold the whole thing in place once installed in the intake on the car. I guess you get what you pay for though, because when I tried to install that cheaper model, one of the clips on it broke immediately, with very little force applied to it. It then broke again after I tried to repair it with super glue. At that point I gave up on it and just ordered this grille, which I can say is far superior. I only wish I'd ordered this one first and saved myself some annoyance.This grille is a single piece and although it has both clips and adhesive, the clips don't seem to actually provide enough positive retention force to hold the unit in place. I have no doubt that the adhesive pads probably would, but since I'm assuming it's a permanent adhesive, I opted to not use it, since I wanted to be able to easily remove the grille in the event that I needed to access the inlet behind it for maintenance. in the future. To accommodate that requirement, I instead used 3M Command strips (https://www.amazon.com/gp/product/B073XR4X72) placed on top of the backing for the adhesive pads. So far they seem to be doing fine. Time will tell if they hold up.As for the unit itself, the fit and finish is much better than the model it replaced. The plastic seems stronger, the mesh seems to be of higher quality, and it does a much better job of fitting the shape of the intake and pressing up against the slats, including the little protrusions along the top edge that require the grille to have notches in it to clear them. The 2-piece model I had before this one did NOT clear those protrusions well at all, and the fit was very poor.I was also impressed to find that the plastic grid on top of the wire mesh for this grille is actually a separate removable piece. I'm assuming that will come in handy for cleaning the mesh, but I'm not sure if it'll be needed or not. I guess I'll have to wait and see.Overall, I'm very happy with the end result, and would recommend this grille to anyone looking to add some extra protection to the heat exchanger inlet on their Tesla Model 3. (Mine is a 2022, by the way).
Flo
Reviewed in the United States on April 26, 2023
The Red color is exactly what o wanted. It is easy to install but it leaves a gap in the middle not like what shows in the picture
Recommended Products
