Your cart is empty.
Your cart is empty.
Features:
- Tremolo bridge with adjustable saddles.
- Brass block, CNC machined.
- Comes with screws and wrench, easy to assemble.
- Push on fit tremolo arm.
- 3 Colors available: chrome, gold, black
Dimensions:
- Bridge Size: 83.2 x 40.3mm / 3.28 x 1.59 in
- String Spacing: 10.8mm / 0.43 in
Note:
Please check the parameter drawing in the attached pics before placing your order.
Dermot Gorman
Reviewed in the United Kingdom on January 6, 2025
The bridge and fittings were really well made.I had a minor problem with the lower part of the vibrato arm mechanism rubbing slightly on the guitar body i had to spend 2 minutes with a file to sort it out.guitar working perfectly.My friend who owns the guitar would be very fussy is delighted with it.
Joseph L Hoffman
Reviewed in the United States on January 13, 2025
I can probably make due with this since I'm building the guitar it's going in, but the block is too large for much movement in a standard Strat size route , I'd say it's a good 1/8" thicker than most other tremolos, which might be a benefit for sustain, but not so much compatibility.
sw_mn_chuck
Reviewed in the United States on April 12, 2025
Not bad, it has a fairly heavy brass block, and otherwise is decent quality. HOWEVER - the trem arm appears to be one that drops in and is friction fit... it's not! It screws into the block so now unless I drill a hole, tap it, and use a small allen screw to secure it, it's just like all the other screw in trem arms that will either be too tight, too loose, or strip out. I am disappointed in myself that I didn't see the very tip of the term are itself - clearly has inside thread.
Don B
Reviewed in the United States on September 20, 2024
Seems to be a really well made product, but it is too narrow (post to post) to fit in my Ibanez RG120. Shame to send it back, really hoped it would have fit.
Kiko
Reviewed in the United States on July 23, 2024
Machining on my unit was good, no burrs or milling marks. Nice weight to it, beautiful brass block. No ability to adjust arm tension which is a downside but the collar is tight with 0 play
Bernabé Ramirez
Reviewed in Mexico on February 19, 2024
The media could not be loaded.
Lemon
Reviewed in the United States on February 15, 2024
I used this in a Musi Virgo Fusion. Listed specs for my original bridge were 10.8mm saddle, 56mm post, 40mm block. The new bridge installed with no surgery.These studs have broad threads compared to the factory set. Removing the old studs can be done easily by:1. Get a junk screw or a metal cylinder slightly shorter than the stud, and which will fit cleanly inside it.2. Place your cylinder into the installed stud. If you used a screw, pointy side up. It will be a lever.3. Screw your old bridge post down onto your lever. It will smoothly draw the stud straight up.4. Gently tap your new studs in with a hammer and a block of wood for a cushion.This bridge is good. The studs and posts seem very nice. About 5-7 cents of slop around the middle for me with a bone nut, Gotoh lockers, and broken-in Ernie Ball Cobalt 8s.The tremolo bar is thin, internally threaded, and fits into a sleeve with a thick rubbery bearing which gives a great tension and zero play, but no apparent tension adjustment. The entire tremolo sleeve is threaded, clamping onto the stamped bridge plate, and can be disassembled. The bar feels really nice and I'm happy with it next to my Edge.The saddles are finished a bit poorly at the screw holes, with tiny burrs and bare metal on several.Acoustic sound from the brass block is definitely slightly different from zinc or whatever nonsense, but I personally don't think it makes a difference through the amp, even as a predominantly clean player. Acoustically, it does make a very beautiful "ping" or "bong" bell-like sound which does make the guitar more fun to strum.
Jim Noakes
Reviewed in the United States on February 11, 2024
A decent hefty block at a price that is really low. Works well and keeps tune
squiggle
Reviewed in the United Kingdom on October 11, 2024
Good system. Nicely balanced feel when installed with good saddles which don't seem to get grooves in them. The metal is hard enough. good value for money .
brian l martin
Reviewed in the United States on January 4, 2024
The media could not be loaded.
Timothy Salter
Reviewed in the United Kingdom on January 20, 2024
Fantastic bridge easy installation the best value for money strat bridge with impressive quality,the only upgrade for me to do was roller fit roller saddles and I already had those in my old bridge will definitely be buying another one same make same supplier, 10 out of 10 seriously 👍
Mel
Reviewed in the United Kingdom on October 10, 2023
The quality of this bridge is superb. It has a sturdier construction than most popular named products and a chrome finish that is second to none. The bridge block is made from brass and makes the bridge a perfect anchor for the strings. The tremolo arm works very well, is push fit and does not need to be screwed in. Altogether a first class product that companies like F-nd-r should fit to their guitars.
romanbubnov
Reviewed in the United States on October 1, 2023
the left cutout is overdrilled and unsuitable for mounting. Tremolo was replaced with in a good one.
Recommended Products
