Your cart is empty.
Your cart is empty. Features:
The Hollow needles made of stainless steel, it is not sticking, use the pin-hole penetration component pin, heated with a soldering iron, a slight rotation to the component lead and copper foil separation.
The needle is used for hardware engineer to desolder the Electronic components(e.g. DIP components)from PCB , Because the needle is used with special stainless steel , the needle will not be pasted Flux.
Package Includes:
3 * 8 Pcs/Lot Stainless Steel With case
Eva Haston
Reviewed in the United States on November 8, 2023
For hard to remove parts small pcb. The bigger needles are of no use.
Ivan Marsh
Reviewed in the United States on April 13, 2023
PCB have a massive ground plan that is just absorbing your heat? Solder wick and sucker just doing nothing for you? Grab some of these they are cheap and they work. If you bend them you are using them wrong, let the heat do the job don't force them and they should last you forever. Also if you do bend one just try it bent, I bent one of these at a 90 to make working visibility easier and it still worked just fine.
Boom
Reviewed in the United States on February 20, 2021
These are great for removing components from a board when a solder sucker or wick just doesn’t do it. Heat up the pipe/pin and as the solder melts, you can push the pipe through the board. Since they are stainless steel, the solder doesn’t stick to them and when the solder hardens, you can remove the pipe and remove the component. Super easy.Many sizes that you can use for different components/situations.I’d almost given up on one project as the solder sucker and wick couldn’t do the trick and these were perfect.Yeah they are cheaply made but they do the trick.
bob amos
Reviewed in the United States on July 13, 2020
These are pretty nice when you take the price vs. quality. They are not top of the line but are still a great deal. The actually do work and work very well. The pins are not perfectly straight and are inconsistent from one box to the other. But at this price, and 3 complete box sets, I can certainly live with it. If you are on a budget these are a great option that actually do the job they are meant to do.
Dj
Reviewed in the United States on February 15, 2020
These are OK, but the handles are a little weak. So don't expect to be jamming this down a solder hole with too much force or they will break.
Roman Pennington
Reviewed in the United States on January 11, 2020
very cheap and pooly made - the QC on these things is laughable.. handles aren't even on straight.
Recommended Products
