Your cart is empty.
Your cart is empty.Product Description
nsoob
Reviewed in Canada on May 7, 2025
Barely functional after 6 months. No signal on the monitor at times and having to unplug and plug the hdmis and hope that the 2nd monitor turns on. Tested with different cables to see if that was the problem. Keyboard flickers on and off when i try to use it for gaming.In short maybe it's a power issues or the ports are janky. Would not recommend.
Customer
Reviewed in the United States on August 4, 2024
Dell Laptop and MacBook Pro M2 connected to docks and then USB C to Display port cable attached to KVM. KVM connected via Display port to a Samsung G80SD OLED 32" monitor.Great stuff:1. 120Hz refresh rate at 4k resolution - Super sweet!2. Quick and easy switching between computersNot great stuff:1. When attaching a power usb hub to USB C or USB A port on the KVM, only my Dell Laptop sees the devices connected to the hub. I plan on playing around with where the USB is connected from the KVM to the dock on the MacBook. Wrong place maybe?2. Uncertain what the power switch does. The device works in both positions. Confusing.3. Had to unplug re-plug input display port cables and unplug and re-plug dock power cables to get video working for the first time. Not sure why.Overall pretty happy after 24 hours. My previous dock was limited to 60Hz refresh rate and would not switch computers using the button ~50% of the time.
Bruno MM
Reviewed in Brazil on August 24, 2024
Estou usando a 1 semana e estou gostando muito. É bem compacto e funciona bem.Funciona tanto com 1 monitor quanto com 2 monitores (se o seu computador tiver opção para plugar 2 monitores).
Kindle Customer
Reviewed in Australia on August 17, 2024
Use this for my work from him setup. Other than doubling the cables I'm using (unavoidable) it's been great, allowing quick and seamless swapping from my desktop pc to work laptop. I swap my dual monitors, keyboard, headphones and mouse, monitor resolution and setup stays between swaps and it's a 1 second swap time really.
Lurchie
Reviewed in the United States on May 9, 2024
My setup:1 MacBook Pro M2 14 inch1 Mac Mini M11 23" Viewsonic Monitor1 27" Dell monitorSonoma 14.4.1I use dual extended monitors.NOTE: I needed 2 USBC hubs (anker 223) to make this work. I had read other reviews and was prepared for this. The instructions also (badly) explain this.I had to play around with the setup to get it right. I'm hoping the picture I included is clear enough to make sense for how I set it up. I set it up and made sure all of the signals worked as they should with my Mini and then set up the laptop. The order in which you connect the HDMI inputs is important because it will affect the resolution settings. Your results may vary and you may have to systematically plug things in to figure out what works. (learn from my mistake and make sure your cables are seated firmly - I wasted a good 20 minutes figuring that out)Once you get past the initial setup it seems to work very well. Switching is clean and precise and I have no issues with peripherals (keyboards, usb hubs and trackpads)I did need to get a USB adapter for my headphones so that I can use one set for both machines. The adapter will plug into the USB A that is directly under the wired remote input on the diagram.
Don’t buy it
Reviewed in Australia on December 11, 2024
doesn't work with Mac
werner32
Reviewed in Canada on September 22, 2023
Have 2 gaming computers, 1 for main and 1 for alt account. Display port cable and USB need to be attached(included). I didn't think to use the USB cables so the keyboard and mouse didn't work. After amazingly fast response from seller I realized my mistake and boom was working perfectly. The wired switch button is great for a discreet install.
No1UNo
Reviewed in the United States on December 13, 2023
So I have a strange setup; a triple monitor setup on my PC and I added a MacMini to the mix which only needs to output to the middle monitor (the big one). My PC runs three, the Mac Mini - one. To top it off, the right hand side is in portrait mode for my email. Still I have to have two keyboards which was a pain. I’m an IT professional and not a gamer. I do tubes and recordings on the MacMini so one screen in the center is enough. My PC has one HDMI and 3 Display Ports (DP). You can daisy chain DPs but that wouldn’t have helped in this setup. The MacMini has an HDMI and several USB-C ports - one of which I made into a DP with a USB-C to DP cable. Sooooo…the inputs on this device are one HDMI and one DP and USB from each machine and one HDMI and one DP on the outputs. Since I am only changing the center monitor (the big beautiful one) for the audio/video work I just routed a single DP from each computer to the device (plus a USB for keyboard and mouse) and used just the DP output port to the big monitor in the center. This works flawlessly, albeit it takes a few seconds for Windows to figure out how many monitors it has before it rearranges the screen. The icons do NOT rearrange themselves each time so that was good. Figuring out which monitor is your MAIN display is the toughest problem for the Windows machines. When I’m in PC mode, I have the DP routed to the KVM for the center monitor and the other two DPs directly plugged into he side monitors (left side - landscape, right side - portrait). When I switch to the MacMini, the center monitor is no longer connected to the PC (according to Windows) and the left and right displays (monitors) hemorrhage a little before settling on two displays while the MacMini shows up on the center monitor - as planned. So, it works and for the price - a great solution for my rig. Hope this was helpful albeit I’m sure confusing. The unit works as advertised; you just need to be on your game when PLANNING the monitor configurations unless you just go straight TWO in TWO out. This was not my case and I didn’t want to pay $400 for a triple monitor KVM!
Unknown
Reviewed in the United States on October 5, 2023
Purchased 2*HDMI KVM Switch 2 Monitors 2 Computers on sale for $58I need it for simple setup to switch 1 monitor + wired USB mouse + wired USB keyboard between PC and laptop. I don't need 2nd monitor but it was cheaper to get this one than KVM with 1 monitor.For test I decided to connect monitor via KVM to PC only (runs at 3840×2160 @ 30Hz).What could be easier? - Disconnect existing (and perfectly working) HDMI cable between PC & monitor from monitor, connect it to KVM "PC-1 Input A1" - PC is connected to KVM. Connect provided HDMI cable to monitor and "Monitor Output-A" on KVM. Enjoy your life.No. You need power.Connected provided USB-A to USB-C cable to 5V*2Amp power. Done???No. Monitor shows "No Signal".Did a lot of troubleshooting - test provided HDMI cable, replaced it, changed this HDMI cable, changed input to PC-2, used Input/Output-B.Nothing work :-(This device has a lot of potential - it has 4 USB-A ports, it has small size, it has 2 options to switch between PCs/laptops.The only problem - IT DOESN'T WORK!!!FYI: My monitor is Samsung LS27A800U.
Recommended Products