Shopping Cart

Your cart is empty.

Your cart is empty.

RC Truck Tires Wheel for 1/10 Big Rock Granite Vortek/Stampede Rustler Hoss/Losi Rc4wd,ARRCat RC Wheels Tires 12mm/14mm Hex,Orange

Free shipping on orders over $29.99

$45.99

$ 22 .99 $22.99

In Stock

1.Color:Black - Rc Tires Wheel


  • 【Compatible With】::almost all 1/10 scale universal RC trucks with 12mm hex 14mm hex,such as 1/10 slash 2WD or slash 4×4 4wd,or for Arrma Senton/Axial/Redcat/Rc4wd RC monster truck Buggy,etc.
  • 【Please Check the Size Before Buying】:Outer Diameter: 4.89" / 124mm; Inner diameter: 2.72" / 69mm; Width: 2.64" / 67mm,Comes with 12mm and 14mm Hex which can be disassembled and replaced.Hex Size: 12mm/14mm.
  • 【Suitable for Almost all Surfaces】Suitable for running on off-road, on-road, pavement, sand, grass, dirt, gravel, snow, etc.The rc rubber tire is with a special texture design, great for non-slipes,more grip,provides a strong ability of road holding and durability and can ensure stable and flexible driving.
  • 【Long-lasting Performance】:These 12mm/14mm hex wheels and tires with foam inserts and made of high-quality soft rubber and plastic materials.And due to the environmentally friendly and strong material,these tires are more practical and durable.
  • 【Easy to Install】:great for replace the old or broken part.Increase overall performance and durability of your RC car.



Product Description

1
1
1

  • We produce various upgrades part for the rc cars,such as :

1/5 1/7 1/8 /1/10 Big Rock/Senton/Vorteks/Typhon/Granite / Kraton/Typhon/Outcast/Talion/Notorious ,etc.


RODNEY
Reviewed in the United States on May 12, 2025
NICE TIRES WITH REAL RUBBER
Misty Cunningham
Reviewed in the United States on September 25, 2024
I put these on my Arrma Vorteks 4x4 3s. 1st set lasted about 10 minutes befor separating from rim. They were exchanged for another set. 2nd set had hubs already installed, pebbles in tite tread & dirt on rims, definately not new but replied. They lasted less than 5 minutes before separating from rims. Return was easy.
craig florio
Reviewed in the United States on June 27, 2024
Wheels are strong, glued well, run very true. Put them on my Onmi Terninator, great tires.
Jessica
Reviewed in the United States on May 10, 2024
These are getting returned. Opened the box excited to get my truck running again but quickly saw it was 4 identical tire wheel units, and the tires have very directional design to the knobs. This means that one side of the car will have the tires running backwards. This will definitely affect handling and braking and while these were on the cheaper side there is no reason for them to be this way. They could have made a symmetrical tire and made a proper set.They also felt extremely heavy. I suppose all that rubber in the tread would help with durability, but at the expense of throttle and braking response.They looked cool though
Ari
Reviewed in the United States on January 4, 2024
Tires look and work great. The tolerances for the adjustable axle length are tight. My only issue was with the set was the screws. It comes with a bag of screws, way more than you need thankfully, and at least 4 of the screws I got were either unusable or a completely different screw than the rest. Price is right where it should be, though I would hope the screw issue was just a bad batch.For the installation I would recommend a power drill since you need to put in 6 screws per tire, just make sure to leave a little bit of room by the base and hand tighten it all the way down since the drill will absolutely drill the screws all the way through the plastic if you let it.
JDub
Reviewed in the United States on January 11, 2024
My wife bought these for her Arrma vorteks. So far she is really pleased with them. They have some good tread on them also seem to be glued pretty good.
getCheeky
Reviewed in the United States on December 11, 2023
The tires have a nice rubber. Not too soft, but soft enough to feel quality. The corners feel firm enough to prevent rollover. I'm not sure of the blend of plastic, maybe a nylon blend. I haven't run them hard enough to break anything. It's handy that they include 4 sets of hubs, but it does create a weak point and add some rotating mass. The hubs vary between 27mm and 38mm deep (measured from the back of the rim to the face of the hub). This is about centerline, and ~14mm positive offset.The wheels are ventilated by a single small ~2mm hole on the rim. There is foam. The glue job is nice.Some of the plastics say, "Made Im(sic) USA." I don't think this is likely or true, but who knows?I'd recommend these if they're a bargain price, which at this time, they are. Unless they fail early or something, they seem about as good as name brand.
Recommended Products