Shopping Cart

Your cart is empty.

Your cart is empty.

Servo Waterproof High Torque - Update 25KG Full Metal Gear Digital Servo Baja Servo Mechanical arm Fittings Baja RC Cars (180 Degree Control Angle)

Free shipping on orders over $29.99

$17.99

$ 8 .99 $8.99

In Stock

1.Size:180 Degree Control Angle


  • Equipped with high precision potentiometers and high-resolution digital chip,ensure stable performance, fast response, strong anti-interference ability,low noise,fast heat dissipation,Good performance digital standard servo, with 1/8 and 1/10 scale crawler,truck,buggy,robotic arm,and any application where standard servos are used
  • 180 Degree Control Angle:DS3225MG 25kg Servos 100% Waterproof servo Large torque - maximum torque can up to 25kg.cm (6.8V)
  • Compatible: with 1:10 and 1:8 scale Crawler/Buggy/Truck RC Car, mechanical arm, Quadcopter Drone and other remote control equipment.
  • Use : Great choice for university professors and students who are interested in developing software for robot parts
  • Middle Aluminum Casing With Plastic Top and Bottom Dimensions:40 x 20 x 40.5 mm ( 1.58 x 0.79 x 1.60 in)(75g)


DS3225MG RC hobby servos are designed for remotely operating model vehicles,such as cars,airplanes,and robots.It provides the functionality of a light weight standard-sized servo, high-speed big torque, water-resistant,sensitive,responsive;
It features an all-metal gear train,digital control electronics,and two ball bearings on the output shaft for reduced friction, and it offers easy access to the rest-point adjustment potentiometer,making them great actuators for robotic projects.This new item is a very good choice for students and hobbyists. It will not let you down!
Electrical Specification
Operating voltage range: 4.8 - 6.8V
Operating speed ( 5.0V ): 0.15 sec/60 degree
Operating speed ( 6.8V ): 0.13 sec/60 degree
Stall torque ( 5.0V ): 21kg/cm
Stall torque ( 6.8V ): 25kg/cm
Control Specification:
Control System: PWM(Pulse width modification)
Pulse width range: 500~2500 μsec
Neutral position: 1500μsec
Running degree: 180° (when 500~2500 μsec)
Dead band width: 3 μsec
Operating frequency: 50-330Hz
Rotating direction: Counterclockwise (when 500~2500 μsec)
Mechanical Specification:
Gear ratio: 275
Bearing: Double bearing
Connector wire: 11.8inches(300mm)
Motor: 3-pole(s)
Waterproof performance: IP66
Package:
1 x DS3225MG Digital Servo
1 x 25T Adjustable metal servo arm


Bielzebub
Reviewed in the United States on April 20, 2025
I read so many reviews on this servo and wanted it to be as good as everyone was saying but it turned out to be pretty bad. It’s not near as fast as it says it is and that was unloaded. I plugged it in to my receiver to center it before attaching the horn and it jittered so bad. I didn’t even get a chance to hook it up to a load to see if the power is worth it because the jitter was so bad. I thought maybe if I attach the horn and put a load on it that maybe it wouldn’t be so bad. The horn didn’t even go on straight. I understand that that can be some fine-tuning with the adjustments on the transmitter, but I don’t recall ever having a servo where the teeth were that far out of alignment in the neutral position. It’s a standard 1/10 scale servo so I assume it would be easy to install and fit just fine. Honestly, could not tell you about the power level because I never hooked it up to a load to test it. Save yourself some headache and time and just get a better servo.
jason m.
Reviewed in the United States on April 5, 2024
Use them on everything. Havent had a issue with one yet.
robert goudy
Reviewed in the United States on September 10, 2023
i havent had them long enough to water test or give a durability rating. really strong enough for 2.2 tires and are just right for my1.9 trail rig .
Aidan Edson
Reviewed in the United States on August 21, 2022
So far so good. It's a tad bit underpowered for the wraith at a standstill but the price was too good. And it looks great. I don't want to try to enter water with this servo, as I see no protection for it. I think a splash will be fine just slno submersing it.
William B.
Reviewed in the United States on August 25, 2020
This is my 4th DSServo, these are fast strong with no pulsing or jitters like the stock ones. I've had both the 20kg and the 25kg that I just put in the 1/10 scale Green Senton truck. These work as good as some of the $100 servos I've tried in the past. You absolutely can't go wrong for the money.
Andy B
Reviewed in the United States on July 28, 2020
First I want to let you know the description says the lead wire is 17” it is only 11” other than that the servo is great. If you need longer wire I would recommend purchasing and extension leas. Fast, quiet and is great for a replacement, I have already purchased more of these to replace on other vehicles.
RC MAN
Reviewed in the United States on May 9, 2020
Strong, cheap and definitely waterproof. Thinking about replacing my Savox with one
Michael Pratt
Reviewed in the United States on March 7, 2020
Used this servo in my rock crawlers. It is durable and strong. It handles my 2.2 tires very well. As advertised, it's definitely waterproof. Can't beat the price!