Your cart is empty.
Your cart is empty.Skyjacker stabilizers dampen out the harshness of the highway, the shimmy from running the additional weight of larger tires and wheels and places control back into the drivers hands. Stabilizers also reduce the fatigue of the driver on a personal level by reducing the amount of physical strength it takes to guide those larger tires on and off the road. Changing the weak stock unit for a better performing replacement or adding dual steering stabilizers is an inexpensive and worthy investment.
Snoman5150
Reviewed in the United States on September 2, 2023
Not a bad kit. Little bit of a pita to drill the holes on the shock mounts but we got it done. Be carefull and stay centered or you wont get the nut on. I was off center on one and had to thread the bolt into the nut inside the mount because I was to close to the side plate. Kind of a pita to drill the holes but not impossible. I used an 18v Milwaukee, piloted and then enlarged. Took maybe an hour with my 11yo son helping. Installed this and a steering box brace and it cured the death wibble on my 06 3500 with 230k miles
Jermaine
Reviewed in the United States on April 29, 2023
Looks great and helps with steering a lot.
vanessa pena
Reviewed in the United States on July 28, 2021
06 Ram 2500 HD 4X4Been driving a couple of of days I like it so far. For the $$ it's not a bad deal. Obviously there are higher grade of vendors out there but this gets the job done just fine,it beats stock partDownfall1)Didn't receive decals2)missing some hardware (4 bolts to screw plates under control arm bracket area)3)No instruction for install4) Had to look up videos or picturesHopefully my pictures help some people out...
Justin speer
Reviewed in the United States on May 24, 2021
This is a well built easy to install product for anyone that has any mechanical ability at all. PLEASE NOTE!! If you have upgraded to the "T" style steering linkage for the third gen, you will need to save your old u bolts and re-use them. Also you will not have a hole in the middle of the draglink to attach the main bracket to. The tie rod end holders will need to be turned up (bolts facing up) as well for this kit to work with the upgraded linkage. Overall a very easy job, as this took less than 2 hours to install. Make sure to have a good quality 3/8" and 1/2" drill bit. The hole under the driver coil spring will need to be made larger for the bolt to fit.
Customer
Reviewed in the United States on November 25, 2021
Paid extra money to have expedited shipping just to arrive with no hardware. Nothing like hauling heavy firewood loads with no steering stabilizer
BV
Reviewed in the United States on February 14, 2019
Instructions where barely visible in black and white pictures with too much contrast. Print the online color if you can because Skyjacker cannot afford color prints. If your mechanically incline or a professional it would be self-explanatory. You want to figure out the positionings of all the nuts, bolts, and brackets before drilling. Use a center punch. Because all the hardware's we're thought out well, you may have extra hardware's that does not apply to your particular model or version of steering links.
JD
Reviewed in the United States on November 6, 2019
Easy install, does what it is supposed to, and it looks good. I didn't want the white/red combo other brands offer.
shawn
Reviewed in the United States on December 1, 2018
Easy installation, last 5000 miles everything still holding tight, Recommend product!
Recommended Products
$99.95
$ 44 .99 $44.99
$48.00
$ 21 .99 $21.99