Your cart is empty.
Your cart is empty.TP-Link PoE Splitter | 802. 3af Compliant | Gigabit Port | 5/9/12V DC Power Output | Up to 100 meters(325 feet) (TL-PoE10R). The PoE Splitter TL-POE10R fully complies with IEEE 802.3af standard, and can work with all IEEE 802.3af compliant PoE switches and PoE Injector such as TP-LINK’s TL-POE150S, to expand your network to where you wish to place network devices but has no power outlet.
Alberto Gómez
Reviewed in Mexico on August 5, 2023
No hay mucho que decir, hace lo que tiene que hacer, trae un cable de corriente tipo dc pero se puede quitar y usar el cable que se necesite, yo use uno con un cable dc a micro usb y funcionó sin problemas, igual trae selección de voltaje así que es compatible con distintos tipos de cámaras, yo estoy usando 2, uno con conector dc de 9V y uno con micro usb de 5V, igual incluye un cable de red.
Tech Medic
Reviewed in the United States on July 5, 2023
Positive: It's a dead simple and easy to use product and does EXACTLY what it says and is advertised to do.Cons: None. If you know what you're buying and you know what you're doing then you won't have a problem.A PoE injector does exactly what is says. It INJECTS voltage into a RJ-45 cable to combine your data source with voltage which, in turn, will allow you to power a PoE device such as a wireless AP or PoE camera at the other end of the RJ-45 without the need for a power source for that device whereever the cable terminates.A PoE SPLITTER on the other hand does the OPPSITE! Of course it doesn't come with a power supply in the box like one of the reviewers left a negative review for. WHY WOULD A PoE SPLITTER COME WITH A POWER SUPPLY IN THE BOX!? My god man! You use this device for splitting the data and power that is already in your PoE injected data line. You can then run the power into a device that isn't PoE powered and the data into whatever you need the data for. An example of this would be APs that are not PoE powered. You don't have a 120V outlet where you want the AP, but you have a PoE powered data line. You place a PoE spitter there and run the data into the AP and use the dc barrel of the split voltage to power the same AP. Job done.I use these PoE splitters not for the data part, but to split out the DC power to be used to power some 12V 1A IR Flood lights to assist the PoE cameras at the same location that are using other PoE data lines. There's no 120V power there, but these splitters allow me to power the IR flood lights with the data lines that were already run in the past. Just have the lines plugged into a PoE switch wihtout data at the other end.
TruthBeTold
Reviewed in the United States on January 14, 2023
This review is for the TP-Link TL-PoE10R, 802.3af Compliant Gigabit PoE Splitter, 5/9/12V DC Power Output, Up To 100 Meters (325ft.), Power Adapter & Cable Included purchased in January 2023. I received version 5.6 as marked on the bottom of the unit. For anyone struggling to find information the box comes with the splitter, a short Ethernet cable, a 12" DC cable, and a paper installation guide. Both ends have a 5.5 x 2.1 mm, male plug for connection to a barrel jack. When powered from a PoE switch without a device connected the LED flashes. The manual does not say what a flashing LED indicates. The device is powering and communicating with an indoor ip camera just fine. In my case I still needed another adapter as the power connection on the camera is micro USB.
K
Reviewed in Italy on January 19, 2022
Non è assolutamente adatto ad ambienti mission critical. Ho ordinato molti pezzi di questo splitter e alcuni dopo mesi sono morti da soli, con carichi tecnicamente ridicoli o cmq sempre sotto ai limiti dichiarati dal produttore, che dichiara 12v@1A.
Alonzie
Reviewed in the United States on November 19, 2019
I like to keep our entire network up and running when there's a power outage. I have one network hub off on its own in the basement. Instead of attaching this hub to it's own battery backup I decided to use a POE injector at the modem and router so they could all share the existing battery backup. This was my first time using POE, so I wanted to stick with IEEE 802.3af compliant POE devices to keep it simple. It was easy to set up and has worked flawlessly.The only slightly tricky aspect was I needed to buy an adapter to get the correct barrel size for the power connector, but luckily the one I needed was one of the Amazon suggested items.I do like that it allows for different power settings.
SN
Reviewed in Canada on September 19, 2018
OverviewI have a Unifi POE switch and the base Unifi Security gateway, and I wanted to power it with PoE instead of using the brick that came with it. Because the USG only consumes around 7W of electricity, the TP-Link TL-POE10R Gigabit PoE Splitter Adapter let me do that easily.The Good Parts* Easy to set up - in my case, just set the voltage and plug the wires into the appropriate ports* Well priced* Works with 802.3af* Power up to 12W@12V (check your device specs before buying one to ensure compatibility)* Comes with a male-male barrel port* Comes with an ethernet cable* Lets you select your voltage* Gigabit ready (some adapters only do 10/100, so make sure you check that before choosing one)* Can also act as an Injector only or as an Injector+Splitter (requires 2 units). I only tested it as a PoE splitter and can't vouch for those other two use cases.Could Be Better* Nothing I can think of
David T.
Reviewed in the United States on May 20, 2017
This TP-Link PoE Splitter pairs well with this adapter: http://amzn.to/2r1WZoV. This combination is great for powering Raspberry Pi or Pine64 boards. I used it with this PoE+ Fanless Switch: http://amzn.to/2qDtOYo. The trio make a great combination for a lab where someone wants to avoid having to play guessing games if the micro-PCs are getting the power they need. This splitter is cheaper than many others but has a maximum output of 15.4w (suggested is
Fernando Wenzke
Reviewed in Spain on March 3, 2015
Este extractor de POE te permite seleccionar entre 5, 9 o 12 voltios.5 Voltios a 2 Amperios (valido para todas las cámaras IP)12 Voltios a 1 Amperio, La mayoría de routers ningun problema.El cable de corriente que viene es de aproximadamente 20 cm de largo, es el típico conector DC, el centro (polo positivo) tiene entrada pequeña, por lo tanto hay aparatos que hay que forzar la entrada.Echo a falta mas opciones de conectores de corriente.El precio Excelente.
Stynka
Reviewed in the United Kingdom on December 26, 2015
I have bought a number of these over a period time to be used in a commercial environment where PoE switches have not been a viable solution. They work ! ...what more could you ask :-)
Bill
Reviewed in the United States on October 26, 2015
Compact, good looking units, working well for me! At first I ordered the individual units (injector & splitter) but then noticed they are available as a "kit" for less money, doh! I then ordered the kit too thinking I would return the individual pieces. However, on the kit (POE injector+splitter) the units are white plastic, are 10/100 only and non 802.3af compliant. The POE injector and splitter when ordered separately are black plastic, are gigabit and 802.3af compliant. Seems very odd. POE injector comes with the 48v adapter. I ended up keeping all of them.I needed to connect 2 building that are 150 meters apart with a CAT5e ethernet cable. The maximum cable length for ethernet is 100 meters. So I needed to divide the 150m into 50m and 100m sections then add a switch at the 50m mark. However there is no AC power anywhere between those two buildings. I used this TP-LINK PoE injector & splitter kit with the PoE injector placed at the beginning of the cable, the splitter (which acts like a switch) placed at the 50 meter mark powered from the PoE injector and the ethernet cable continues on for the last 100m. I don't use the 5/9/12V output for anything. I used the white units from the "kit", everything is working very well. Saved the black gigabit units for spares, might upgrade to the gigabit ones if client needs more network speed.
Recommended Products
