Your cart is empty.
Your cart is empty.The POEINJ1000WT is a shielded passive PoE inserter splitter that are compatible with data speed up to 1 Gigabit The DC connector is a removable wire terminal type power connector The RJ45 connectors are shielded to ensure continuous shielding from power source to destination device Power is supplied on all 8 Ethernet pins 4 Pair allowing for transport of up to 130W over a single CAT56 wire up to 100m Features. High Power Shielded Design uses all 4 pairs. 101001000Mbps Compatible. Removable Wire Terminal Connector. 5 to 58VDC Power Over Ethernet. Power On LED Indicator Applications. Wireless Equipment. Ubiquiti air Fiber Antennas. Security Applications. HD PTZ Cameras Specifications. Dimensions 28 x 21 x 095. Weight 019
Charles James Phillips
Reviewed in the United Kingdom on February 26, 2025
I ordered 2 of these having read about the reliability issues when used for Starlink POE, ended up ordering a third which actually worked... for about a year!Aside from the wiring issues for Starlink, the failures can blow your power supply as well, so get one of the more modern turnkey solutions.
Mel
Reviewed in the United States on January 31, 2025
Every Tycon PoE device that I've purchased -- and there have been at least 10 via Amazon and other sites -- has failed within 3 years. Time to switch to another manufacturer. Actually, past time.
J
Reviewed in the United States on September 12, 2024
We're running Starlink Dishy from our 12 volt house battery bank on our sailboat and used this PoE. So far working great after 1 month of use.
francisco garcia
Reviewed in Mexico on July 29, 2024
Producto confiable
John
Reviewed in the United States on June 17, 2024
Works great for my Starlin Gen 2 12v conversion.
pleekit
Reviewed in the United States on March 19, 2024
Use case was to use this device to power an ODU Wireless Antenna from Soyealink. It used all 4 pairs for the POE and operates at 19V 1.5A. The existing POE device could not be used as I was placing the device in my off grid cabin. So in conjunction with a 12v to 19v dc-dc converter I was able to operate the device without having to run a 120V AC inverter.Item operates as expected.
KK
Reviewed in the United States on August 7, 2023
Worked great for modifying my StarLink Dishy to DC powered. Be sure to “Xcross” modify both RJ45 connectors that plug into the injector. See photo I attached (source outsidenomad.com). Forum research shows the injector does not tolerate shorts even for brief durations. Be sure to wire it correctors the first time.
nick williams
Reviewed in Canada on July 6, 2023
Exactly what I needed for starlink!
Scott A Keller
Reviewed in the United States on February 1, 2023
What I have to give one less star for is the fact that it can be difficult to fit wires in the mount unless the wires are the correct gauge. I have 16ga and it can be tricky to keep the wires in there since theres no real 'mount' for this unit.Altogether its been perfect for my usecase - converting 12v to 48v for POE in an RV, but the wires in there are giving me a headache enough that I'm going to have to get a smaller gauge wire to feel more comfortable.
Darren
Reviewed in the United States on December 18, 2023
I built a battery based power board for a Starlink dish and this POE injector worked to adapt the dish to a router to be able to get WiFi from the system without the OEM Starlink router. This and two other components (48VDC converter and a YAOSHENG Rectangular Dishy Cable Adapter to RJ45) and I was up and running off a 12 volt car battery.
Gunnar Radeloff
Reviewed in Canada on December 16, 2023
I tried two of these, the first one came with glued in power connector or superglue on the case, so it was obviously a preused and returned item. Tried another one first. It just got hot and killed one of my switches, I tested all my cables with athernet cable tester and found no issue. Both units didn't work for me, hopefully they didn't trash my starlink. I guess the saying "buy cheap buy twice" is more than true here.
Alan Webb
Reviewed in Australia on January 11, 2023
Used this PoE injector to convert a Starlink to 12v. Works well and speed is in excess of 150Mbps.
Frolic
Reviewed in the United States on April 15, 2023
I was using this POE injector to power my Starlink dish. I fed it 48 volts DC and the draw was never more than 80 watts (snow melt never used). That is within the specs for the device. It failed in less than 90 days. Using an ethernet cable tester I determined that there was no continuity on several of the ethernet wires. I used Amazon's "contact the manufacturer" button to contact TyCon and report the failed device. Within a day, they responded and indicated that the device has a 3 year warranty and I should fill out an online request for an RMA and they would get back to me. Ten days later and no response. It's a $16 device with a serial number. Once they verified the serial number they just should have sent one out. Instead they are supplying inferior products and not honoring warranties.
Recommended Products
$23.99
$ 10 .99 $10.99