Shopping Cart

Your cart is empty.

Your cart is empty.

Viloga Upgrade 3D EPP Plane Sakura Aerobatic Flying Airplane, 420mm Durable Foam RC Plane Kit to Build for Adults (KIT+Motor+ESC+Servo+Mini 4CH RX(Frsky-D16), EPP Sakura, Not Including Radio Control)

Free shipping on orders over $29.99

$109.99

$ 52 .99 $52.99

In Stock

1.:Kit


2.Color:Epp Sakura


  • ✔️Ultra-durable and lightweight EPP construction embedded in carbon rods to ensure impact resistance.
  • ✔️️Optimized flight performance with simple structure, it can performace perfect aerobatics such as Hovering, knife edge, flat spins, inverted flight, rolling etc.
  • ✔️Beautiful appearance with brightly coating will be the most eye-catching aircraft at every flight.
  • ✔️Mini F3P 3d airplane with 420mm wingspan is perfect for indoor and park fly.
  • ✔️️Multi combos to choose just DIY your own SAKURA 3D airplane and have a fun to fly it.


Features:
- The upgrade SAKURA EPP 3D airplane
- Durable and Light weight EPP structure with strong resistance
- Perfect for beginners to aerobatic flight training
- Optimized flight performance for flexibility flying
- Micro F3P airplane perfect for indoor and park fly
- Beautiful appearance with brightly coating
- Multi combos to choose
Specification:
Wingspan: 420mm
Length: 380mm
Flying Weight: ≈62g
Recommended Parts (Not included):
Motor: MC1106 3800KV
ESC: 5A 2S
Servo: 2g*3
Propeller: 5inch
Radio: 4CH
BATT: 2S 150mAh
Package included:
1* Micro SAKURA 420mm wingspan 3D Aerobatic EPP RC Airplane KIT (Unassembled)
1*MC1106 3800KV Motor
1*5A 2S ESC
3*2g Servo
1*propeller 5 inch
1*2s 150mAh battery
1*Mini 4CH (1.00pin 3P) RX (Protocol: Frsky-D16)
1* Instruction manual


Hess
Reviewed in the United States on February 6, 2024
I was a bit skeptical of this kit before it even arrived but I can say from some who has been in the rc hobby since I could hold a transmitter, this is a decent little kit. Yes the kit is not easy to build yes the instructions are pretty sparse yes it is hard to find a micro receiver as small as the one shown. But if you’re not flying a new radio link you need to upgrade because there are plenty of tx companies with tiny revivers. All the plugs are micro molex or whatever in the rc hobby you neee to know how to solder. Solder servo plugs. Or do what I did to save weight and just use pins. Idk all in all I’m glad I was able to pick up this kit for the price it got me back in the air again with a plane. I am very rusty when it comes to planes so I did end up smashing it up but 30 something bucks gets you a new airframe on a rc plane site. I’m a fpv pilot for years now this a great little toy to re learn 3d flight. I will try to post a video of it flying when the weather is nice.
Tom B.
Reviewed in the United States on December 27, 2024
unit is small which i wanted but the electronics kit for it was very expensive so that was a dray back on buying a small inexpensive kit. flew ok but kind of twitchy due to size
Michael B.lovinlife
Reviewed in the United States on December 14, 2024
The plane is cheap . I’m not the first to say it , but I’m going to repeat it , the electronics are of poor quality . Glued servos in , cut servos out . Glue in new servos . Buy the RadioLink A560 $175 RTF Had one , wish I had bought another . You get way more for your moneyAmazon is awesome
Edward House
Reviewed in the United States on August 27, 2022
Love this rc airplane, the kit was well made, no problems and built it in several hours. I was flying it the next day. Get one!
Rodster
Reviewed in the United States on August 27, 2022
The wings and fuselage assembled well.The receiver, speed control and two of the servos needed to be replaced from receiving it. I bought those parts, which more than doubled the cost.
mark
Reviewed in the United States on June 20, 2022
the control rods didn't fit into the control horns, they had to be drilled out; the small size makes this tricky. It seems small, but its a kit, these things should fit.All the parts use tiny connectors that no one makes receivers for, they (DW) sell them, but they don't ship to USA; this also means you can't buy replacement parts easily if you break something. I had to cut the connectors off, and solder them to receiver I got that came without the pins soldered on.Be careful with the servos, one of mine broke while I was centering it; it could have been bad and broke quickly, I wasn't using excessive force. I opened up the servo, it had lost a tooth, and the gear-train wouldn't engage.It is really hard to find a battery for this model, I had to make my own packs from cells, as I can't find a better option.Amazon had a recommended 300 mAh battery advertised as bought with this product, but it is way too heavy for the plane.Even with the 10 gram battery with all the recomended parts, it still won't fly, maybe i used too much glue?
matendie
Reviewed in the United States on December 9, 2021
Servos are too weak for original hinge, cut and use tape for hinge. Otherwise servos are going to burn out. Otherwise great very small plane, awesome for small area. great for 3D learning
Larry Rusnak
Reviewed in the United States on December 2, 2021
I purchased this kit with the power package figuring I would get it faster on Amazon.The only part of the kit that connectors matched was the motor wires to the speed controller. The servo connectors were 1.0mm micro connectors. I had to splice Futaba/JR connectors. The propeller adapterDid not fit the motor, it required drilling. The power connector on the speed controller needed to be changed as well. In hindsight I should have returned the plane and purchased my own components. Have not flown the plane yet. Have an indoor session scheduled for this weekend.
Recommended Products