Your cart is empty.
Your cart is empty.
Specification:
Name: Wind power controller
Maximum input AC voltage: AC35V
Output DC voltage: DC12V/24V
Battery charging cut-off voltage: DC14.5V±0.3V/29V±0.3V
Maximum charging current: 15A (12V) Maximum charging current: 10A (24V)
Generator speed limit voltage: DC14.5V±0.3V, 29V±0.3V
Protection level: IP67
Static power consumption: 0.008A
Bearing power: 500W/800W
Maximum bearing wind speed: lvl.12
Working temperature: -35℃-65℃
Input wiring: three-wire
Control mode: 12V/24V compatible
Installation : bolt fixed
wiring:
1. Connect the positive and negative terminals of the battery and the charging cycle respectively.
2. Connect the three-phase output voltage of the fan to the three-phase input terminal of the controller fan.
packing list:
1*Wind power controller
Precautions:
1. Confirm that the fan output voltage is consistent with the rated voltage of the battery.
2. First connect the positive and negative poles of the battery, and then connect the three-phase voltage output of the fan.
3. Please strictly follow the instructions to connect the battery and wind turbine to the controller, otherwise the controller will be damaged.
Notice:
Due to lighting effects and angles, the product may have color differences, please accept it.
There are tolerances in product dimensions due to manual measurement.
ELECTROFIX SAS
Reviewed in the United States on March 26, 2025
No funcionó
Recommended Products
