Your cart is empty.
Your cart is empty. Parameter Information:
Product Name: Metal Gear Micro Servos
Product Model: MG90S
Product Size: 22.8x12.2x28.5mm
Product Weight: 13.6g
Operating Torque: 2.2KG/cm
Response Speed: 0.11s/60 Degree
Working Voltage: 4.8V
Dead Band Width: 5 microseconds
Operating Temperature: 0 to 55 Degree Celsius
Interface Type: JR / FUTABA General
Structural Material: Copper metal teeth, coreless motor, double ball bearing Accessories: Multi-arm, 30cm wire, fixing screws.
Application Range: 450 E-sky, swash plate servo, fixed wing, helicopters KT, fluttering, gliding, small robots, and other models of Mini Car, Mini Ship, Helicopter and Airplane.
Wiring:
Dark Gray: GND
Red: VCC 4.8-7.2V
Orange: Pulse Input
Package Include:
2x MG90S Metal Gear Mini Micro Servo
David
Reviewed in the United States on March 25, 2025
I use lots of the normal rotation mg90s, but I needed 2 of these 360° continuous ones for an rc car project. They work great
Rc73
Reviewed in the United States on February 2, 2025
Great for smaller rc vehicles however I purchased a 2 pack and a five face the 5 pack had a 20t spline and the 2 pack had a 21 t spline
Jcat
Reviewed in the United States on June 23, 2024
This is a metal-geared Tower Pro branded servo, with no internal stops - it's designed to rotate continuously at a speed proportional to the delta from neutral pulse (1500us @ 50hz). I was able to integrate these with both Arduino and Esp32 projects with ease, using a separate 5v supply since several sensors are already hanging off of the dev board's supply. In motion, these are certainly audible, but it's a gentle noise... I think the metal gearing and internal lubrication does a great job of keeping friction and noise to a minimum. I'll be using these in some hobby robotics projects for which they're already a noticeable improvement over the plastic geared predecessors! These fit right into the existing mounts, and are a good value for a pair.
Alex
Reviewed in the United States on June 15, 2024
Not much to say about the DiGiYes 2Pack MG90S Micro Servo with metal gears. These seem like the standard MG90S servos I've gotten from various "no name" vendors over the last few years.The good news is they're cheap and work well for various project purposes, not just R/C vehicles. Each one includes 3 servo arms. Functional and affordable, they get the job done for my needs. Not much else to add!
Mark L. Olsen
Reviewed in the United States on February 25, 2024
One of the servos was DOA, unfortunately i cant say much about how well they function since i need both of them to work.
Anthony
Reviewed in the United States on June 6, 2023
Not super strong but perfect for my project. No jitters and very fast transitions at 6v.
Recommended Products
