Your cart is empty.
Your cart is empty.Product Description
How to keep yourself by working in a non sawdust particles workshop?
Using the Denwenny KINGMASTER air filtration system.
Yes, we understand creating airborne sawdust particles is inevitable when cutting wood. It's the pesky side of woodworking. However, dust is harmful to your respiratory tract and must be properly controlled to maintain good health.
Made for stone workers, woodworkers or carvers working in the workspace with sawdust particles, Denwenny KINGMASTER air filtration system is a highly efficient, and super easy to use device.
FEATURES:
- It comes with 360 degree Air Intake design that circulates the air in a 400 square foot room up to 13 times per hour.
- Two-speed operation allows optimum airflow at a rate of 1050 or 1350 cubic feet per minute.
- Features a 1-micron MERV-11 filter that is easy to replace.
- The programmable timer automatically shuts the unit off after your set time.
Using Bipolar Ionization
It works by sending out charged particles with either negative or positive ions into the air. The particles cluster around harmful airborne particulates. It then inactivates and makes them larger to increase the likelihood of being captured by your air filter.
The ionizer of KINGMASTER F12D can neutralize odors, reduce wood rot particles and the volatilization of organic matter. Make the air fresher, and provide a cleaner environment.
Powerful Indoor Air Circulation
The air filtration system cycles all the air in a 40-foot-by-40-foot-by-10-foot room up to 13 times in one hour.
According to the air-handling industry, air changes per hour (ACH) remains the standard for how often a machine can move all the air in a fixed space. Meaning, you need to be 6-8 ACH to meet ventilation standards.
Vortex Fan
- Delivers up to 1350 CFM
- 180 watt max at highest speed
- Work efficiently even if the wind resistance increases.
Two-stage Speeds
This allows you to easily switch between two speeds of 1050, and 1350 CFM depending on your situation to best accommodate your needs. The 360-degree Air Intake circulates the air in a 400-square-foot room up to 13 times per hour.
Lasts Long & Filters Strong
Constructed from non-woven glass microfiber with a pleated design, the MERV-11 Air filter delivers maximum performance and will last you a long time. It can filter 90% of 3-10μm particles and 85% of 1μm particles.
Denwenny KINGMASTER air filtration system is widely used in different workspaces, providing multiple benefits for your work environment. It removes films of dirt, debris, particles and fine sawdust particles from the air for improving wood turning, sanding, sawing, chipping and air quality.
Notes：
- The package includes accessories.
- Use a separate electrical circuit for your tools. This circuit must not be less than a 12AWG wire and should be protected with a 15 A time-delayed fuse.
- Clean the particles of the filter regularly to avoid efficiency reduction.
Aaron
Reviewed in the United States on May 4, 2025
It seems there are several people rebranding this same product but the good news it's a good one so you have options. I've got mine mounted upside down above a sanding area so the exhaust it blowing upwards and less likely to just blow everything around underneath it. With the amount of air it moves it's great that it has a filter facing every direction so it can pull everything and not just from one side. Controls are simple with on/off and a high/low and while you have a remote I do wish there was some way to make it turn on when another tool is running. It is made of sturdy metal and nothing about it feels cheap. I appreciate the inclusion of multiple ways to mount it but I just went with draping the chains over a beam and using the screw-in hooks to tie them off to. Even when moving as much air as it does it's surprisingly quiet; something that matters less in a shop but I like it.
Cainiac
Reviewed in the United States on March 16, 2025
I got this air cleaner for my 900 ft2 woodworking shop. I have a 3 hp dust collector for extracting sawdust from various tools, but sanding (no downdraft table yet) and use of hand tools as well as fugitive dust not collected still clouds the air on occasion. I do wear P100 dust filters and although they work well, I haven't yet needed to don one (although I'm sure I will sometimes) since I installed this air filter.The device is beefy, made of nicely formed steel sheet with a good coating of paint.The controls are easy to navigate, as is the remote control. I have a 9-foot ceiling and reaching the controls on the device is easy since it's suspended by the provided chains.I set it up between my table saw and assembly table using a ceiling-mounted electrical outlet. The first time I used it I wondered about the strong stream of air blowing directly down where I tend to be. Would it kick up dust and otherwise be annoying? Nope.The air coming down from the unit is clean, and it creates a nice zone with no airborne dust. The volume of air moved by the fan quickly scours the entire shop. So far, I've only used it for "normal" activities, so whether it's effective for thickness planing, ripping and jointing hundreds of feet of lumber remains to be seen. That said, I am quite optimistic.Verdict:Recommended.I should have got this years ago!
Scott
Reviewed in the United States on March 15, 2025
I'm very grateful for a nice filtration system like this one. I'm using it in my garage wood shop.A couple features that I really like is that it has a high and a low speed. High speed produces 1350 CFM, while the low speed moves 1,050 CFM. There are times when I'm not doing much but I'm still producing dust. I still want something to help clear the air. I've used it on high when I'm doing more aggressive woodwork and I am very pleased with how quickly it helps to clear the air. My shop is only about 700 square feet but this filtration system is designed to move up to 1400 square feet if needed. This means it's much easier for me to keep my garage air very clean.Regarding air movement, there is the option of having the clean air blow upwards or for the air to blow downwards. I have only used it with the air blowing downwards since I have mine hanging from the ceiling. I think that's a nice option though. In the event I ever move it somewhere else, I'll appreciate that function.Another feature I like is that it can be placed on a bench, as mentioned, or it can be easily hung from the ceiling with the included hardware needed. Mine is hung from a very tall ceiling and it's nice to be able to have that option of installing it permanently.A great convenience that I think most people will appreciate is that it's IR controlled. That makes this air filtration system so easy to operate. It's easy to turn on and off and change the powerful vortex fan speed. It also controls the timer which can be set anywhere between 1 to 9 hours. If I've been working for a while in my shop, I typically allow it to run a couple hours after I'm finished just to make sure that the air is clean. Another thought on the clean air, it has really reduced the dust that accumulates on my equipment, workbench, walls, and my floor. Basically, my whole shop has less dust on everything and as much cleaner.Not everyone will need a filtration system as powerful as this one, but if you are thinking about a dust filtration system for your work area, please consider this one. It's well built, looks extremely durable and seems very well made. I have no doubt that it should last a good long time without any problems. I've had it now 6 weeks and I haven't had any problems whatsoever.My father-in-law was diagnosed with a very serious lung and throat disease. The doctor said it was caused by not using a mask and filtration system while he has been doing woodwork for 50 years. I'm not going to allow that to happen to myself, and of course, neither will my wife. She is very happy I ordered this. This is a fantastic unit to consider and I am super happy with mine.Denwenny has built a five-star air filtration system and this is very easy for me to recommend.
mamacau
Reviewed in the United States on April 11, 2025
Pros:- This thing really does move the air and exchanges air volume at a very quick rate, even on the low setting.- This has the ability to take out very fine particles.- Can even be used for cooling a shop on a hot day.- Filters are very easy to remove and can be brushed or blown off with compressed air.- Great for indoor sanding, sawing, paint and finish, etc.Cons:- I found the instructions a little lacking because it seemed they were trying to cover multiple models with one instruction booklet.- Noise is a factor, especially in a small shop.- There’s no way to divert the downward air flow so if you’re working directly below this system, especially on finishing or painting, it may actually blow dust into your work. Putting some sort of air diverter so it blows to the side should be an add-on that could be purchased.Overall, this is definitely an air cleaner that pulls in particles and traps them so they don’t get in your lungs. It will keep my shop cleaner and my lungs cleaner as well.
mitchee
Reviewed in the United States on August 28, 2024
This is a great filter. Had a slight problem, and their customer service communicated very nicely and made it right!
Recommended Products
$21.83
$ 9 .99 $9.99