Your cart is empty.
Your cart is empty. When a car's suspension is upgraded with lowering springs, the result is a lower ride height, a more aggressive look, and better handling due to the lowered center of gravity. While those things are great improvements for the car, the tires suffers from increased wearing and tearing since the tires will slant inwards towards the inside fender. Camber Kits will allow the vehicle to remain at the lowered ride height while correcting the angle of the tire closer to the spec it was supposed to be.
Package Included:
1 x Pair (Left & Right) of Front Camber Kits
This product is compatible with:
Honda Civic (1996-2000)
Anonymous
Reviewed in the United States on September 19, 2024
BVery good service
Jose Nunez
Reviewed in the United States on July 8, 2024
El articulo quedo perfecto y tiene un buen precio
Mcluvin
Reviewed in the United States on February 29, 2024
Pros- very close to OE design style arms on the EF which is why I originally bought them- Ball joints seem to be good quality- adjustment slider seems to be keeping alignment-very easy to adjust on the fly if needed- stamped steel with good welds ( I would check them to be safe )Cons- horrible packaging- hardware isn't good out the box and uses chrome plated hex screws that easily strip.(switched to longer grade 10 screws and installed locknuts for redundancy)- less travel than OE suspension- upsets the car violently on some bumps and ruts due to binding at max max travelOverall they work fine, been running them for 6 months on the daily now with no issues. Id very highly recommend swapping the hardware that won't strip out when tourqed down. I like how they are similar to the oe style and they bolted on with no problems. You pay for what you get, and seem safe enough for daily use, but I wouldn't push them to hard all the time, definitely NOT FOR TRACK USE. They offer good adjustment though. with some improvement from manufacturer these could be very good out of the box, overall id recommend them for what they are, but keep in mind there are better options.
Philip s
Reviewed in the United States on November 16, 2024
I don’t normally leave reviews. Before purchasing these I read the reviews and seen with the attached pictures that they installed them upside down don’t believe these reviews they do what you expect them to do. Overall I leave a 4 star due to the fact that the hardware included is very weak and strips easily so only thing I recommend is to change the hardware included to something more durable and to let the professionals install these upper control arms or at the the very least know what you are doing when it comes to installing. Overall they correct camber to a certain degree and they are durable enough for daily use wouldn’t recommend for track use.
Chuys Garage
Reviewed in the United States on December 20, 2023
WORKED FOR WHAT I WANTED. NOT TO EASY TO ADJUST BUT ONCE YOU HAVE IT SET UP THEY DO WORK FOR WHAT YOU NEED THEM
Jacob
Reviewed in the United States on April 17, 2021
Fits my 94 inetgra. Rides high so avoid big bumps. The ball joint bolts come loose so I'd recommend some blue loctite. Other than that, great buy for the price to align that annoying camber!
Maureen
Reviewed in the United States on April 10, 2021
haven't put on yet but got them ready .they are actually nice for the price of course bushings or cheap but I can press them out and put better ones in them. mine had a little rust on them no biggie for this type of price u always sometimes have to make product better yourself.
Bait137
Reviewed in the United States on February 10, 2019
Ship time was slow with the package arriving a full week after a also late prime shipment ordered at the same time. I was also a day after the "guarrenteed" delivery date. The "box" it was in was bits of cardboard badly held together by packing tape. The contents was falling out of the box with no packing materials. I did not have to open the package to get the kit out. On to the product itself. I'm going to start with I am a mechanic and a certified Honda technician. The kit was for my personal 96 gsr swapped Civic ex. Previous owner had dramatically lowered. I originally was going to go with a name brand kit but it looked like the name brand ball joints would fit this kit so I decided to take a chance. Arms seem to be okay. Bushings look okay.. the ball joints were tight out of the box but felt loose (without play) after installation. I give them maybe a month or two before I am trying to put replacement ball joints in. The kit arrived with the ball joints installed upside down. I didn't catch that till one side was on the car. Upside down these serve as a lift kit raising my lowered civic above stock hight. I reinstalled the ball joints and the one arm correctly and it does its job. Installation note. Set both adjusters the same at approximately what they should be prior to install to minimize adjustment on the alignment rack. They will not be an easy adjustment when doing the alignment. Also don't drive the car till it has had an alignment after installation. I was 13mm out on left toe and 10mm on the right. My camber was almost perfect though. It does its job for now I will try to update this in the future. I will increase the review to 2 stars if I can verify a name brand kit replacement ball joint will fit these. I would not buy again.
Recommended Products
$24.15
$ 12 .99 $12.99