Your cart is empty.
Your cart is empty.
Product description:
K-type temperature probe thermocouple
Anti-corrosion
Teflon temperature measurement line
Model: TP-01;
main color: Blue, Yellow
Total Length: 2m
Package content: 2 x K Type thermocouple
Temperatre is used,must notice:The length of temperatre field iis inserted is eight times to ten times of diameter oneself at (24-30):if it were be inserted too shallow,the accuracyrate of measuring temperature would have been effected.
Travel bug
Reviewed in Canada on July 19, 2024
I use these to convert my fluke multimeter into an accurate thermometer! They were compatible and the temps didn't need any calibrating. Exactly what I was looking for.
David M
Reviewed in the United States on January 30, 2024
I go through these thermocouples pretty quickly, it's hard to keep them pristine when you shove them through screw holes and other things. Two piece set, perfect for both inputs on my meter and priced better than a single Fieldpiece thermocouple which is arguably of the same quality. Very happy.
Icedragn
Reviewed in Canada on April 22, 2024
I'm going to give this a 4 star because I'm not sure if it's the probes or my multimeter. I have a Proster multimeter and it's been pretty good for my hobby electronics and automotive uses, but even the included temp prob is 4c incorrect. Moving on to these probes, they are 5-6c incorrect. I measured my freezer and fridge that have built in digital thermometers reading 4c and -18c respectively. These probes both measured 9c and -12c, and if you're curious my Proster included probe read 8c and -14c. Now if you have a way to check then like this then you can record that data and keep in mind those inaccuracies, but who knows how much out it will be at higher and lower temps. I gave a 4 star instead of 3 because i don't have an expensive meter and maybe it's the meter being unreliable as well. My other meters don't have temperature settings.
Jeff
Reviewed in the United States on December 29, 2023
I have a number of these types of probes from various sources, and these seem to be just as accurate, generally reading within 0.1 to 0.3 F of the other probes. For the current price of under $7 each, they're a reasonably good deal.However, I will say that the lower price is for a reason. The plug is a slightly lower quality than those from other manufacturers (it's noticeable but there's no functional difference that I can tell). The prongs weren't perfectly straight (easily remedied by bending them carefully so that the plug would sit flush on the measuring device). Finally, all of my other probes contain a plastic or rubber collar in the hole on the plug where the wire goes into it, to protect against wear due to repeated flexing and bending. On these probes, the wire goes directly into the hole with no protection. For occasional use this might be okay but if you're using them regularly, you may end up replacing them a little faster.
Recommended Products
$58.78
$ 26 .99 $26.99