Your cart is empty.
Your cart is empty.Product Description
Feetech FS90R Servo
The servo can be controlled using a direct connection to a single microcontroller I/O line without any additional electronics, which makes it a great miniature actuator for beginner robotics projects.
Wheel
This black plastic wheel is press-fit onto the FS90R output gear shaft, and easy to make a nice drive solution for small robots.
The wheels have silicone tires and measure 60 mm (2.36″) in diameter. Two additional mounting holes for 3-40 screws make it possible to use the wheel with several of mounting hubs.
Size
FS90R Servo Size: 23.2 × 12.5 × 22 mm
Wheel Size: 56mm x 8mm
Compatible with Arduino
This mini 360 degree servo with accessories is very cheap and is ideal for microcontroller systems like the BBC micro:bit, compatible with Arduino, Raspberry Pi, Robot RC Car Drones Smart Car and PICAXE.
- Speed or engine power is very convenient, no longer cumbersome to connect the remote control and receiver. It is equivalent to a "hand".
Feature
Parameter
Can be connected with two sets of steering wheel or electric adjustment; Single - chip control, good stability, high precision. Turn the knob to test the steering system.
When the connection of the electronic controller (brush or no brush can be), you can get rid of the remote control equipment for manual speed control, for testing adjustment.
The function of "moving receiver" simulates the rudder of the transmitter through the knob.
- 1. It is easy to detect and set the virtual, jitter and median of the server.
- 2. Servo Stall torque: 1.3kg.cm/18.09oz.in(4.8V), 1.5kg.cm/20.86oz.in(6V).
- 3.Operating speed is 110RPM (4.8V), 130RPM (6V), but you can change the pwm to change the servo speed , to make it slower or faster.
About us:
——Professional service, Integrity operation, Customer first.
——We have always cared about the customer experience and improve the product function details.
——We will be responsible for any damages or losses incurred in the shipping process.
——We try our best to provide the most professional service for each customer.
Alessandro S.
Reviewed in Italy on May 27, 2024
I motori sono fatti bene ma la regolazione con il potenziometro va continuamente toccata e non si riesce ad avere un punto di fermo ripetibile nel tempo. Restituiti
Vic
Reviewed in Canada on November 22, 2024
I would like to ask about some problems with the 360 degree servo motor I purchased from you. I use arduino ide to set it to 90 degrees. Generally speaking, the 360 degree servo motor will not rotate at the initial 90 degrees, but after I connect the board, it will automatically start to rotate. How do I set this initial value so that it doesn't move？
DAVE GARANT
Reviewed in Canada on January 26, 2024
These are complete garbage they’re jerky and they are nothing they are advertised as Just garbage.
Narvinder Bamara
Reviewed in Canada on January 7, 2022
A basic servo with multiple parts.I just wished it came with a shaft extender.
kathy zhang
Reviewed in Canada on September 16, 2021
we ordered this for rush project, it arrived on time and the parts are durable to use and met our requirement for the project.
w
Reviewed in the United States on March 7, 2021
I would have given this a good review for even the most minimal amount of performance. I expected little to nothing I just wanted them as a means to test RX and TX combos. Three of them turn continuously when plugged in and the fourth one just kind of fidgets left and right whenever you give any signal. If they even worked a tiny bit I would give them five stars.
Cetanhota
Reviewed in the United States on February 27, 2021
This product was easy to work with and was a great addition to my current project.
Shawn O.
Reviewed in the United States on January 23, 2021
Great servos for the price cant beat it
Food king
Reviewed in the United States on September 22, 2020
Great product
Scott Greenwald
Reviewed in the United States on July 27, 2019
These work but have very little torque and break very easily. They are also almost impossible to mount to anything other than with hot glue, the screw holes are way to small and located in poor areas.
Customer
Reviewed in the United States on September 30, 2018
Took a moment to get the "tire" on the "wheel" but then the wheel mounted on the servo with no challenges at all, and was able to drive the servo with normal servo libraries on arduino very easily. Took a few moments to build a code wrapper around the Servo object. Remembering that 90 means stop, 180 means full speed forward, and 0 means full speed backwards was awkward. I have 2 new interfaces. One where 100 means full forward, and -100 means full backwards; and another where 1.0 means full forwards and -1.0 means full backwards (the latter just multiplies by 100 and uses the former). Anyway, lots of torque, lots of traction. Excellent for the small robots we're using. I'll come back and post a video when I have one.
Leon G
Reviewed in the United States on September 24, 2018
Bought these for a science fair project. They are powerful for the size and quite sturdy. Arrived promptly and in perfect condition. Much easier to use than regular geared motors for mobile robots because no motor shield is necessary.
Josh Barth
Reviewed in the United States on April 26, 2018
Pretty disappointed, just got these in today. 3 out of 4 of them work the other one does not move like the others, running the same code on all 4. What a fluke.Edit -- I'm going to change to 4 stars, I ran some variable speed code through each one, and it seems like they all may work as expected, not sure why right out of the package one did not want to fully rotate like the others. They all seem good now, will be testing over the next few days and will update to 5 stars if they continue to be solid
Recommended Products