Your cart is empty.
Your cart is empty. Description：
Apply Environmental Condition
Storage Temperature Range: -30℃～80℃
Operating Temperature Range: -15℃～70℃
Operating Voltage Range: 4.8-6.8V
Mechanical Specification
Size: 40*20*40mm
Weight: 60g
Gear ratio: 342
Bearing: Double bearing
Connector wire: 300±5mm
Motor: 3-pole
Electrical Specification
Idle current (at stopped): ( 4mA@5V ) / ( 5mA@6.8V )
Operating speed (at no load): ( 0.2sec/60°@5V ) / ( 0.17sec/60°@6.8V )
Stall torque (at locked): ( 21.5kg·cm@5V ) / ( 25kg·cm@6.8V )
Stall current (at locked): ( 1.6A@5V ) / ( 2.5A@6.8V )
Control Specification
Control system:PWM (Pulse width modification)
Pulse width range: 500~2500μsec
Neutral position: 1500μsec
Running degree: 180° or 270° (when 500~2500μsec)
Dead band width: 3μsec
Operating frequency: 50-330Hz
Rotating direction: Counterlockwise (when 500~2500μsec)
William J.
Reviewed in the United States on January 9, 2025
after I put it together it works great. it has lots of parts and NO directions
Client d'
Reviewed in France on January 24, 2025
Bon produit , mais je vous invite à l’acheter sur AliExpress , beaucoup moins cher . Le vendeur nous prend un peu pour des vaches à lait au vue du prix proposé sur ce site
N and V ❤️
Reviewed in the United States on December 20, 2024
Works great with Arduino projects and is strong enough to pinch fingers, so be careful. The mounting holes make it easy to attach multiple motors together or mount to a larger project. Currently using a few of these motors to create a robotic arm.
Daniel
Reviewed in the United States on November 30, 2024
Product looks solid but have not been able to test it yet since the servo did not come with the screws to mount the u brackets to the servo.
A.A
Reviewed in Canada on November 26, 2024
Seems very high quality made doesn't seem cheap or delicate. One major flaw I added photos to try and demonstrate, is that the wire comes out of the servo on the side that has the moving bracket. So the mounting bracket is on the opposite side of the wire. The moving bracket side, has the wire, which gets in the way of the moving bracket. However as I tried to show in the photo this is easily solved by pulling the wire down, however, I can see that causing stress on the wire possibly you could damage the wire this way. Also if your motor was to swing to far, as shown, it could pinch the wire between the box of the servo and the moving bracket. Ideally, they could have ran the wire out the mounting side as this is more logical for having the wire out of the way of a moving part, no tension would of been placed on the wire, and depending on what you mount to, you could of drilled a whole into your project and ran the wire down through it avoiding any pinching. Other than that one huge design flaw, it seems very sturdy and good quality material. I'll be returning mine only because of the wire, if your able to over come and over look this, it's a great motor.
Patrick C.
Reviewed in the United States on April 28, 2024
I'm glad I finally bought a product that works as described, perfect
Recommended Products
