Your cart is empty.
Your cart is empty.Product Description
SOITPOP 5PCS Firewood Drill Bit Wood Splitter
SOITPOP 5PCS Wood Splitter Drill Bit
SOITPOP serves more than 10,000 consumers around the world, and provides every consumer with the most assured warmth.
SOITPOP Wood Splitting Drill Bit
Package Included:
What You get?
1 x 32mm Wood Splitter Drill
1 x Small Hex handle
1 x Hex shank handle
1 x Round shank
1 x Square shank
Specification:
Type: Log Splitter Core Drill Bit
Material: High carbon steel + Titanium coating
Application: Firewood Splitting
Used for: Household Electric drill, Hammer Drill, Impact drill, Wind batch, etc
Drill Type :
-Rhinestone round
-Hex handle electric hammer drill bit
-Round handle electric hammer drill bit
-Square handle electric hammer drill bit
-Hex handle Wind Batch
SOITPOP Log Splitter Drill Bit
High Strength/Durable
4 in 1 Dri Bit Suitable for Different Electric
Split vertically not tiltly
Lightweight and portable
Non slip groove
4 Different handle models and sizes
The size of the drill bit is 32mm and the shank type (Small Hex + Round + Square + Hex shank)
Perfect Design
Exquisite Workmanship
Sharp head design
High Hardness
Premium Steel
Non slip groove handle Clear lines
SOITPOP 5PCS Wedge Wood Splitter
How to use kindling wood splitter:
- Split vertically not tiltly.
- Split from the edge of the wood, not from the middle, it will get stuck when you spilt from the middle.
- Large pieces of wood must be split multiple times, not too thick in one split.
How to use SOITPOP kindling wood splitter more correctly and efficiently
Do not tilt the drill
Pay attention to the speed of your machine,hold it firmly and turn it clockwise
Use it prependicular to the wood fiber
Large pieces of wood must be split multiple times, not too thick in one split.
Avoid splitting from the middle
The wood splitting drill should avoid starting from the middle position to avoid getting stuck.
Start at the edge
Split the small-diameter wood vertically, Not recommended for knotty woods or large diameter hardwoods.
Easy To Split Firewood
Please Pay Attention, My Friends
- DO NOT drill this into the center. Be Cautious for the reversing torque.
[Attention]: If you drive this into the center of a hard piece of firewood with a powerful drill, it will get stuck and put you in danger of twisting your wrist badly or setting the wood spinning.
[Attention]: High torque. Use a handle with the impact driver or it may hurt your wrist.
[Attention]: High torque. Fix the wood piece or it may spin and hit you.
Texanator
Reviewed in the United States on June 16, 2024
The media could not be loaded.
Vince M.
Reviewed in the United States on December 26, 2024
Don't waste the $ these do not perform as described. Soft metal and takes more work than just splitting with a maul. Great concept; poor product.
ZW
Reviewed in the United States on November 30, 2024
easy handy tool, for best performance, drill at the wood edge
AAC
Reviewed in the United States on September 22, 2022
I really wanted to like this tool, but it just didn't work for me.I had some already split campfire wood for the test. Unfortunately, the tool just doesn't work for me. I was starting the tool into the wood about 1/2 inch from the split edges of the piece. I was driving the tool with a Ryobi impact screw gun which will drive a 3" deck screw completely through a deck. The tool would dig into the wood until the impact would not drive it any longer, but the wood refused to split.Maybe it would work better on soft woods. I don't know. I returned it.
ValueBuyer
Reviewed in the United States on May 4, 2022
The bit has a screw in shank to suit various drill chucks. The problem is if the bit becomes stuck you can't reverse the drill to remove it. The bit is a good value if you are able to weld the drill shank to the bit.
Joseph Goulart
Reviewed in the United States on December 27, 2022
This thing is perfect for when you buy chunks of wood for use in a smoker and sometimes a few of the chunks are too big to put into the wood chunk holder so this thing is nice for making those a bit smaller so you can use all the wood you bought since you know you skip those when the bag is fresh but you get to the point that you have no more smaller ones so now what? Put this thing on the end of your IMPACT driver and hold that piece of wood with a vice grip or channel lock and BOOM... smaller pieces of wood perfect for the smoker.
Elizabeth W.
Reviewed in the United States on December 2, 2022
Not sure if our drill is too powerful or the wood is too hard, but this totally didn’t work as expected. We attached it to our drill but it just gets stuck in the wood-over and over. And it kills your hands to get it back out. And when it doesn’t get stuck, it over spins and goes flying out of your hands. We had to keep taking the bit out of the drill and knocking it out of the wood. Super disappointed as it would have been nice to have an easier way to get kindling. Our axe is heavy for me to use
TXdrawl
Reviewed in the United States on April 26, 2022
First its way, way, too small to be used as suggested.Second it only drills in and get stuck!Third, you cant keep it from loosening in the drill.Fourth, when you tighten it down with a wrench, reference above, it locks down way too tight from the pressure spin. Then you cant remove it because you cant grip it with anything.Fifth, you will hurt your wrist! Once it gets stuck, AND IT WILL, it will spin the wood and you cant hold it!It's still attached to the largest bit, because I cant get the SOB loose!I spent about 30 minutes trying variations, angles, and speeds... I have yet to split a single piece of wood. Beyond WORTHLESS for splitting wood, PERIOD!
Recommended Products