Your cart is empty.
Your cart is empty.Product Description
- The MPPT controller detects the power generation voltage of the solar panel in real time and tracks the highest voltage flow value W to make the system charge the battery with maximum power output.
- Applied in solar PV system, it can coordinate the work of solar panel, battery and load to improve The efficiency of solar power generation. MPPT tracking efficiency up to 99.9%, circuit energy conversion efficiency is up to 98%, and charging efficiency is 15%~20% higher than general controller.
Note:
- The product is a simplified version for MPPT.
Gugxiom Solar Charge Controller 100 Amp
- Industrial‑grade master chip, 16 AD sampling accuracy, temperature, charging current, discharge current accurate real‑time display.
- Automatic focusing MPPT tracking charging, high charging efficiency, non‑stop detection during charging, bidirectional focusing tracking.
- Big LCD display, all adjustable parameter.
- Three‑stage charge management, effectively protect the battery.
- Build‑in short‑circuit protection, open‑circuit protection, reverse protection, over‑load protection.
- 16AD SAMPLING ACCURACY
- MPPT TRACKING CHARGING
- SOLAR CHARGE CONTROLLER WITH LCD DISPLAY
- 3 STAGE CHARGE MANAGEMENT
- PROTECTION FUNCTION
Five Advantages and Four Features of this Solar Charge Controller
Five Advantages:
- Built-in maximum power tracking algorithm, which can significantly improve the energy utilization efficiency of PV system, about 15%-20% higher than the traditional PWM charging efficiency.
- Double-peak or multi-peak tracking technology, when the panel is shaded or part of the panel is damaged, there will be multiple peaks, the controller can still accurately track the maximum point power.
- Using advanced digital power technology, the circuit energy conversion efficiency is up to 98%.
- The combination of multiple tracking algorithms can accurately track the proper operating point within 1 second, and the MPPT tracking efficiency can reach up to 99.9%.
- With current-limiting charging mode, when the panel power is too large and the charging current is greater than the rated current, the controller automatically reduces the charging efficiency and makes it work at the rated charging current.
Four Features:
- MUCH SMARTER: intelligent industrial-grade master control chip, 16-level AD sampling accuracy, temperature, charging current, discharging current accurate real-time display, power generation at a glance to understand.
- MORE EFFICIENT: non-stop detection of charging process, two-way focus tracking. Low heat generation bi-directional MOS tube anti-backflow circuit, high power charging mode, ultra-low heat generation.
- MUCH SAFER: built-in overheat, overcurrent, short circuit, open circuit protection, reverse connection protection, when the fault is eliminated, the controller automatically recovers, without damaging the equipment.
- MORE CONVENIENT: R5.0 solar charging DC jack, R5.0 DC light output DC jack, easy to connect.
Short Circuit/Open Circuit Protection
- In the event of a short circuit, the fuse blows to effectively protect the device from damage.
- Diode breakdown voltage is less than power transistor to protect the components in the circuit.
Overcurrent/Overcharge Protection
- The device is automatically powered off when the current is higher than the set current to protect the device.
- Use the control program to detect the connected device whether it is fully charged, and then stop the current flow.
Over Discharge/Reverse Connection Protection
- The circuit is automatically cut off when discharging to a certain voltage value.
- Using the unidirectional conductivity of the diode, a field effect tube for protection is connected in series with the circuit being protected.
Roll
Reviewed in the United States on September 6, 2024
I can hook up more solar panels
Andrey Sledkov
Reviewed in the United States on September 4, 2024
cannot withstand more than 60 amperes, turns off
Chris Rogers
Reviewed in Canada on July 7, 2024
The screen slowly faded until there was nothing. Could not find a way to contact company. Save your money.
Didier Chevalier
Reviewed in the United States on March 21, 2024
I finally decide to install this 100amp controller to replace my 25 years old 40amp Trace since I've add 3 panel of 100watts. Well It worked fine for a week as we had very cloudy weather, and then it start over heating and the plastic cover melted away as the LCD became black. All panels connected would not bring over 50amps maximum, so I guess this controller does not deliver what he propmissed. Anyway this does not work. Don't buy it unless you want your house to burn down.
Jason M
Reviewed in the United States on November 14, 2024
I spend some time to research before buying..And I am glad I did.This little charge controll work great for me starter solar system that I was building and was very impressed by it...So impressed that I bought more and has convince othrr ppl who was building their solar system to buy as well.. it's been years since I bought.. and they still going without any problems
Dave1962
Reviewed in the United States on August 9, 2023
The best charge controller ive had so far.
Thomas J. Ferrell
Reviewed in the United States on July 25, 2023
Works as advertised is a whole lot better than the other regulator that I bought...I'd buy it again.
jorge c.
Reviewed in the United States on October 8, 2023
bought this item in 12/24V 100A, tried wire, the largest one that fits is awg 10 (connector 4x4mm) I do not think it can carry that current in 24V, Gugxiom did not replied me. I will use ferrules for connection hope it works for my 1110W solar panels
Larry L.
Reviewed in the United States on October 2, 2023
Voltage input was not enough for me and that’s what madders in Direct current plus you would have to use at least 8 Gauge wire that cost more than a better controller the higher the voltage the better the Efficiency from panel to controller it’s not the amps it’s the voltage copper wire is costly
Recommended Products