Your cart is empty.
Your cart is empty.Product Description
AEagle lift supports struts make your every opening and closing easy and smooth!
At AEagle, you will find our fully stocked range of lift supports, also known as strut, shock, pistons, gas spring, prop, hydraulic, cylinder, and damper. Our range will be found in use on most major cars. Many of our lift supports are also suitable for use as a direct replacement to your part.
Compatible with:
for 2007-2011 Toyota Camry | Base Sedan 4-Door Front Hood
for 2007-2011 Toyota Camry | CE Sedan 4-Door Front Hood
for 2007-2011 Toyota Camry | Hybrid Sedan 4-Door Front Hood
for 2007-2011 Toyota Camry | LE Sedan 4-Door Front Hood
for 2007-2011 Toyota Camry | SE Sedan 4-Door Front Hood
for 2007-2011 Toyota Camry | XLE Sedan 4-Door Front Hood
Location:
Hood
Dimension:
Extended Length [in]: 27.40
Compressed Length [in]: 15.9
Replaces for Part Number:
6333, PM1102, 5345006042, 5345006041, 9804VL, 24761, 10030744, 550017, 5344006050
Tips
- Package: 2 X Struts (Left and Right)
- Note: New struts couldn't be compressed by hand, once installed they work great.
Good Quality Materials — Smooth Lifting, Quiet Running.
Five Minutes Easy Installation — Just use a small flat screwdriver to remove your old struts off your car.
JOHNNY
Reviewed in the United States on February 25, 2025
Great ! easy to install.
Juan Gamino
Reviewed in the United States on February 19, 2025
WORKING REAL GOOD
DAVID ERICKSON
Reviewed in the United States on January 9, 2025
These were a perfect fit, worked well, and were easy to install in just a few minutes.
Steph M
Reviewed in the United States on January 27, 2025
Purchased a while back. They’re still holdin strong. No complaints. Easy install.
Herman Forbes
Reviewed in the United States on April 12, 2025
Easy to install and worth the money
Juan
Reviewed in Mexico on February 8, 2024
Le quedaron muy bien
♔B
Reviewed in the United States on February 5, 2024
The hood struts seem to have good quality as an aftermarket part. They fit my 2009 Camry for a reasonable price.The only challenge that I'd like to note for future buyer is during installation, you need to install the top ball mount FIRST (ball connection on the hood), and then the connection point on the car afterwards. I had done this on one side and it was easy to install, but didn't realize I needed to follow this order and tried installing the struts on the car mount first and then had a long struggle installing it on the hood ball mount. Eventually, I figured it out and followed the order and now both are installed snuggly and secured.
Richard A Stotelmyer
Reviewed in the United States on November 20, 2024
These hood supports were supposed to fit my 07 Camry, length and diameter are right but the stroke end had a straight connector, that meant the it didn’t completely lock on to the hood. I was able to exchange the old ends a make them work.
Chin Yee Koo
Reviewed in the United States on April 19, 2024
The product is good. It's a quick install, I do it myself, I stuck my 1-liter bottle to support the hood from closing itself. or you can just have another person holding it for you just be on the safe side.1) First right after taking out of the box, remove the strut from the compressed ties. (Either cut ties with scissors or use screwdriver, pry to the side carefully, when you are doing that avoid pointing the struts towards yourself or anyone.2) IMPORTANT!! You will need to swap the ball clipper joint by unscrewing them, the ones with slight angled should be on the rod side, the straight one on the thick piston side.3) Remove the old struts by unclipping using a small flat screwdriver. One at a time, remove one, install one is what I meant.4) To install, you just need to push it into the ball socket, always install the top hood end. and then the bottom end, the car engine bay side, the same way pushes it into the ball socket, do not mess with the clips. Once done, you can work on the other side.*Note I Install the struts right side up just as it was originally, I would not agree with some of the comments that they install it upside down,The quality of the product looks as beefy as the original, I hope it will last. will update again when I need to replace them.
Recommended Products