Your cart is empty.
Your cart is empty.The IDEAL 61-747 TightSight clamp meter is a CAT III 600 V rated auto ranging true root mean square (TRMS) digital clamp meter that measures up to 400 Amps AC and DC current via the clamp head. It measures up to 600V AC and DC, frequency, resistance, continuity, capacitance, and diodes via test-leads (included) and measures temperature (F/C) via a K-Type thermocouple (included). It's capable of detecting the presence of voltage between 40V to 600V via a non-contact sensor in the right tip of the clamp. The patented TightSight LCD display, located on the bottom of the unit, enhances safety and productivity by displaying a secondary reading at the end of the meter, eliminating the need to bend or twist conductors or place you head near the panel in order to see the main meter display. Both displays can be backlit, and a built-in flashlight can be illuminated when working in poor or zero lighting conditions. The unit uses an illuminated red LED in the center of the meter and emits audible tones to notify when voltage is above 30 volts, when continuity is detected and when the NCV senses voltage within its set range. The clamp head has a built-in probe tip holder on the backside of the right clamp to allow measurements holding the clamp in one hand and the second lead in the other hand. The meter has a hanging strap mount (compatible with all other IDEAL meters with this feature) that allows for a hanging strap (sold separately) to be attached to the meter so it can be hung from a nail, screw or magnetic surface. An industrial grade over molding enhances grip and drop protection. This meter features hold, min/max, relative, zero, range, and selectable auto power off functions. The meter comes with 3 1.5V AAA batteries and an easy open, fully accessible storage pouch with a belt loop that allows for meter, probe and thermocouple storage.
Yahme
Reviewed in the United States on May 27, 2025
It works well. no issue so far.
Brian H.
Reviewed in the United States on May 24, 2025
Works well can’t complain
CRAIG MILLER
Reviewed in Canada on March 28, 2025
I have been using the Ideal clamp on meters for about 20 years now and it is amazing. Very sensitive and makes troubleshooting much easier. The new functions on this model make it even easier to use. They improved the rubber molding too so it will likely not be attacked by oil like the old ones were. The door on the bottom that would flop loosely is gone too. The flashlight and voltage detection is great too. Fantastic tool.
Joshua
Reviewed in the United States on February 11, 2025
Works great. No issues with any functions.
thomas hilger
Reviewed in the United States on April 29, 2025
Excellent would buy again does what it's supposed to do?
James
Reviewed in Canada on May 13, 2024
Great product. Seems solid, feels solid, double insulation protected, certified to be sold and used in Canada. Is it professional quality? I can't tell since I'm not an electrician, but certainly a great tool for a homeowner.Clamp is a bit on the thick side, but does the job.I like the second screen on the bottom, it really helps taking readings in tight spaces.I also like that it has non contact live wire detection. Would've been nice it it could detect live electrical outlet, but it don't. Probably because the wires must be a bit too far and/or sensor not sensitive enough.I was looking a clamp ammeter that can measure both AC and DC amperage and this one does it and is still affordable.It has a little built-in flashlight which is nice when cutting power or working in dark corners.The clamp has a probe holder which help not having to have 3 hands when taking measurements with the probes.
Isaac
Reviewed in Mexico on March 10, 2024
Lo ocupo en mi trabajo muy a menudo y no ha presentado ningún falla. +10
Customer
Reviewed in Canada on December 5, 2024
My husband uses this daily. Does what he needs to do and more.
Customer
Reviewed in the United States on November 24, 2024
Reads 10 amps more then actually happening compared to ohms law or another meter...shouldve returned it for calibration reasons
danvida
Reviewed in the United States on November 10, 2024
It is working well
Terry L Jackson
Reviewed in the United States on October 27, 2024
Been using ideal for a long time this one is great for service wark
Thomas
Reviewed in the United States on January 5, 2024
A pure joy to use in appliances enclosures/panels , while working off ladders or up on roof tops. A very strong argument can be made that this design in inherently safer and perhaps even that the dual display should be required by law-seriously.....Great design and astounding customer service-couldn't figure out why the meter was not recognizing DC amps so I sent an email to the Company less than four hours latter (during the Holidays!!!!!) I had the solution-after selecting by dial a push of the 'select' button is required.
Mirsha P.
Reviewed in Mexico on September 20, 2023
Es exelente en precisión, buen resultado en mi trabajo, no le pide nada a otros medidores que tengo, fieldpiece, Klein, UEI... estoy satisfecho con su desempeño, ya pedí la cinta y el imán para colgarlo mientras trabajo, no te arrepentirás...
Recommended Products
