Shopping Cart

Your cart is empty.

Your cart is empty.

Power Queen 12/24V 30 Amp MPPT Solar Charge Controller with Built-in Bluetooth, Support Remote Monitoring, Default for LiFePO4 Batteries and Compatible with Sealed, Flooded, Gel and Lead-Acid Battery

Free shipping on orders over $29.99

$119.99

$ 51 .99 $51.99

In Stock

About this item

  • 【12/24V MPPT with 99% Tracking Efficiency】Given Innovation MPPT technology's high tracking efficiency of up to 99% and peak conversion efficiency of 98%, the Power Queen MPPT Charge Controller can track arrays' maximum power point to get the most power to charge the battery and loads. It improves the energy utilization ratio by 15%-20% when compared to conventional PWM controllers.



Product Description

Power Queen 1224V 30 Amp MPPT Solar Charge Controller Bluetooth

Automatic detection of 12V/24V battery systems; high tracking efficiency of up to 99%; 12V Li battery default setting, compatible with lithium, sealed, gel and flooded batteries; integrated Bluetooth module for remote monitoring of battery status via a mobile app.

Power Queen 12/24V 30A MPPT solar charger bluetooth

These examples assumed a 100% efficient conversion in the charge controllers for simplicity. In reality, a small amount of power is lost as heat during the conversion.

Power Queen MPPT solar charger bluetooth

Die-cast Aluminum Design

Die-cast aluminum design and oversize heating sinks allow for efficient natural heat dissipation

Power Queen MPPT solar charger bluetooth

Max.Appliable Wire

Maximum wire gauge that is supported is 8AWG

(There is no wire cable included in the package.)

Power Queen MPPT solar charger bluetooth

RS232 Communication Protocol

An external Bluetooth adapter with RJ12 port can realize real-time monitoring, allowing you to check the overall system status

Power Queen MPPT solar charger bluetooth

Temperature Sensor

Only avaliable for the Lead-Acid battery, and it senses the environment temperature when place the sensor close to the Lead-Acid battery

Power Queen MPPT solar charger bluetooth
Default Battery Setting 12V LI (Lithium Iron Phosphate) Battery
System Voltage 12V/24V
Rated Charging Current 30A
Rated Load Current 20A
Max. Solar Panel Input Power 450W for 12V/ 900W for 24V
Dimensions L9.65*W7.07*H3.25 inch
Conversion Efficiency <97%
MPPT Tracking Efficiency 99%
Weight 4.41lb/2kg
Communication Method RS485(RJ12) / Inbuilt BT
  • The Power Queen upgraded solar charger is designed with built-in Bluetooth module.

  • Yes, the controller is suitable for both 12v and 24v systems; the 12V Li mode is the default setting; and it can automatically sense the system voltage once properly connected to a GEL, AGM, or Flooded battery bank.

  • Yes, the Power Queen MPPT controller can be connected in parallel to increase charging current for a single unit battery or a battery bank. But it's not able to be connected in series.

  • We strongly advise reading the manual before installing the Power Queen MPPT charge controller. We have created a detailed installation guide with instructions at each step.


Jack Harley
Reviewed in the United States on March 21, 2025
Excellent . Love the Bluetooth
Linde
Reviewed in the United States on January 7, 2025
Works well. Like it should. Incredible support.
Crabbing, Clamming and Boat Camping
Reviewed in the United States on April 26, 2025
it is powering my single 100 AH LiFePO4 battery, which runs my 120 volt, 7 cu ft chest freezer, via a 600 watt pure sign wave inverter, and my 12 volt 55 quart chest refrigerator. I have 300 watts of soloar panels feeding this unit. it has been running flawlessly for 2 weeks. i am, so far, very satisfied with this controller.
J.M
Reviewed in Canada on April 26, 2025
Parfait
Marc s.
Reviewed in Canada on April 11, 2025
Super!!!!5 étoiles
Mary Mitchell
Reviewed in the United States on March 3, 2024
It works as it should, easy to install, and user friendly interface. No complaints.
Merle Schoelkoph
Reviewed in the United States on December 31, 2024
I had a question and Power Queen customer service quickly responded. Thank you Yuki. So far i couldn't be more pleased with the product and customer service. Yuki, requested to know what panels I was using to make sure my solar panels were compatible, they are. Good to know, being a first timer like I am, as a solar power producer. My system is a somewhat larger system than I will normally need, but in the winter months, here in the Pacific North West the sun is very low in the sky. At the time of this post we may have had 3 hrs of direct sun light in the past 2 weeks with only a 9% power loss due to the controler and. So I have a Power Queen 30 amp charge controller to 8 -100 amp hour lithium iron phosphate batterys wired in series then parallel for a 24 volt system. Wired to 8 - 100 watt, 24 volt panels, giving me over 10,000 watt back up power WHEN, not if our power goes out. It keeps my chest freezer, small refrigerator, Ryobi battery chargers, and internet/security system online. Also I'm hooking up my garage door opener which is a annoying when you got to go and have to manually release the door from the operator to open the door.
sc ShoPPer
Reviewed in the United States on December 3, 2024
It works, it has it's own app, and it was affordable. I will update this review if anything changes. Customer service is very very very talkative...*The more I try and use this MPPT, the worse it gets. The APP cannot stay connected from 5ft away. Sometimes the APP connects, and doesn't display anything. Sometimes the APP connects, and DISPLAYS THE WRONG DATA! Not sure who the actual manufacturer is (this unit is identical to the LiTime model) but it is not great at all.*The app and connectivity issue are too much to deal with. Even 1 foot away its hit or miss, meanwhile I can see 2 bars on my neighbors TV.. Leaving it at 3 stars, as it does it's job, but the Bluetooth and or app are pretty bad. That said, the Load feature is REALLY good, the display is useful, and if they made a 50a 60a or 100a version, I would be on board, but charging 4000wh at 12v 30a takes a very long time...
HillbillySteve
Reviewed in Canada on November 15, 2024
Made a mistake buying this. I purchased all Power Queen products being “green” with solar. The battery was and is no good, the shunt is plain and nothing special and the MPPT charge controller is kinda useless. Can handle 1 400watt panel. Not very usable and I cannot recommend buying. Spend a bit more and get a setup to handle more power. I wasted over $650 and I have a useless system.
Customer
Reviewed in the United States on May 17, 2023
Working fine for a month now. Decent charge current. Had to use the user settings to charge best for LiFePO4 batteries.